Panasonic FP0R User Manual page 33

CPU Types
Communication parameter
Baud rate
Data length
Parity
Stop bit
Set the station number for the TOOL port in the TOOL port setting area of the system
registers.
Input connector
5
Input status LEDs
6
Output connector
7
Output status LEDs
8
Power supply connector (24V DC)
9
Use the power supply cable provided. Product no.: AFPG805
10 COM port (RS232C or RS485)
Used to enable communication with external devices, e.g. a programmable display.
11
Expansion hook
Used to secure an expansion unit. The hook is also used for installation on the flat type
mounting plate (part no. AFP0804).
12
Connector for FP0/FP0R expansion units
Connects an FP0/FP0R expansion unit to the internal circuit. The connector is located under
the seal.
13 DIN rail attachment lever
Used for easy attachment to a DIN rail. The lever is also used for installation on a slim type
mounting plate. See "Using Optional Mounting Plates" on page 71.
32
Factory settings
9600bit/s
8
Odd
1bit