High/Low Beam Selector; Passing Button - APRILIA RS 660 2020 Manual

Switching on the opposite side turn indicators without pressing the switch in the in-
termediate reset position causes both the time and distance counters to reset and
recommence from zero.

High/low beam selector (02_100)

In DRL ON mode:
•
the DRL lights only are lit when the selector is left in the centre position (2).
•
pressing the selector into position (1) switches on the high beam headlight
•
press the selector into position (3) to flash the high beam headlamp to signal
danger or an emergency.
When the low beam headlights are on (DRL OFF):
•
the low beam lights only are lit when the selector is left in the centre position
(2).
02_100
•
pressing the selector into position (1) switches on the high beam headlight
•
press the selector into position (3) to flash the high beam headlamp to signal
danger or an emergency.

Passing button (02_101)

Press button (3) to flash the high beam headlamp to signal danger or an emergency.
Releasing the switch deactivates the high beam flash.
02_101
79