Cleaning The Eye Guard; Checking The Needle; Cleaning The Length Feed Plate - Brother HE-800C Instruction Manual

8-4. Cleaning the eye guard

8-5. Checking the needle

8-6. Cleaning the length feed plate

Wipe the eye guard clean with a soft cloth.
NOTE:
Do not use solvents such as kerosene or thinner to clean
the eye guard.
4876M
Always check that the tip of the needle is not broken and
also the needle is not bent before starting sewing.
4877M
Clean the length feed plate (1) if foreign materials such as
shavings start getting onto the material.
1. Loosen the two bolts (2), and then remove the length
feed plate (1).
2. Clean the underside of the length feed plate (1) and the
needle plate (3).
3971Q
HE-800C
8. CLEANING
64