IKA MATRIX DELTA PLUS Manual page 13

/// Menu structure
Tempering Control rate
Timer Timer / Counter
Start Condition
A B
Mode A
C ...
B
C
Graph Axis scaling
Menu
Program Program 1
Program 2
...
Program 5
Safety Password
Settings Languages
Units
Display
Sound
Factory Settings
Information
24
Factory setting
Fast √
Moderate -
Slow -
00:00:00 [hh:mm:ss]
Immediately √
Set Temperature Reached -
√
-
-
X-Axis
5 minutes
√
Y-Axis Automatic
Manual Maximum 110.0 °C
Minimum -10 °C
-
-
-
-
000
English √
Deutsch -
... -
Temperature °C √
°F -
√
Background Black
White -
√
Firmware Update Information
Key Tone √
Software Version 1.02.003/1.01.021
Firmware Update Information yes
/// Menu details
Tempering:
Control rate:
In the "Control rate" menu option, you can select the desired control rate between "Fast", "Mod-
erate" and "Slow"� A check mark (√) indicates the control rate is activated�
Fast: Fast tempering with a certain level overshooting�
Moderate: Moderate tempering with minimal overshooting�
Slow: Precise tempering without overshooting�
Timer:
In the "Timer" menu option, you can set "Timer / Counter" for "Tempering"�
You can set "Timer" value from 00:00:01 [hh:mm:ss] to 99:59:59 [hh:mm:ss]�
The tempering function stops automatically after the set time has elapsed and the set time
appears on the display�
Note: If the tempering function is stopped before the set timer value expires, the reverse
counting of the timer is interrupted�
If you set the "Timer" value to 00:00:00 [hh:mm:ss], the counter is active�
The counter automatically starts to run fom 00:00:00 [hh:mm:ss] upto 99:59:59 [hh:mm:ss]�
When the maximum value is reached, the device stops the tempering process�
In the menu option, you can set the timer / counter "Start contidion" as:
Immediately: The timer / counter starts immediately when starting the tempering function�
Set temperature reached: The timer / counter starts only when the set temperature reached�
A B
Mode:
C ...
Mode A:
After power on / power failure no automatic restart of functions�
Mode B:
After power on / power failure automatic restart of functions, depending on previous settings�
Mode C:
Set values (set in mode A or B) cannot be changed� After power on / power failure automatic
restart of functions, depending on previous settings�
25