Subscribe to Our Youtube Channel
Related Manuals for IKA Dry Block Heater 1
Summary of Contents for IKA Dry Block Heater 1
- Page 1 20000005226 Dry Block Heater_042017 ® Dry Block Heater 1 ® Dry Block Heater 2 ® Dry Block Heater 3 ® Dry Block Heater 4...
-
Page 2: Table Of Contents
Source language: German Contents Page Declaration of conformity Explication of warning symbols Safety instructions Unpacking Correct use Assembling the stand Operation Setting the operating mode Controlling the temperature via contact thermometer Maintenance and cleaning Error codes Technical data Warranty Declaration of conformity We declare under our sole responsibility that this product corresponds to the directives 2014/35/EU, 2014/30/EU and 2011/65/EU and conforms with the following standards or normative documents: EN 61010-1, EN 61010-2-010, EN 61326-1, EN 60529 and EN ISO 12100. -
Page 3: Safety Instructions
- overfilling of media (in a beaker) - unsafe condition of container. Fig. 2 • Process pathogenic materials only in closed vessels under a suitable extractor hood. Please contact IKA ® if you have any questions. Only process media that will not react... -
Page 4: Unpacking
® Dry Block Heater, - IKA - In the case of any damage a fact report must be sent imme- Depending on the IKA ® Dry Block Heater model 1.2, 3, or 4 diately (post, rail or forwarder) - Mains cable - Temperature sensor PT 1000.60... -
Page 5: Operation
Operation ® ® ® ® Dry Block Heater 1 Dry Block Heater 2 Dry Block Heater 3 Dry Block Heater 4 Commissioning Move device switch (E) to the OFF position Insert the mains power cable into the power socket (A) Move device switch (E) to the ON position The unit will be set to factory setting mode A (see “Operating modes”) -
Page 6: Controlling The Temperature Via Contact Thermometer
In case of repair the device has to be cleaned and free from any isopropyl alcohol, materials which may constitute a health hazard. Please request Cosmetics Water containing surfactant, the form to "clearance certificate" from IKA. Or, use the down- isopropyl alcohol load-print the form to the IKA ® website www.ika.com. -
Page 7: Error Codes
If the actions described fail to resolve the fault or another error code is displayed then take one of the following steps: - contact the IKA ® service department, - send the device for repair, including a short description of the fault. -
Page 8: Technical Data
* Test parameter: with test block and glass vessel filled with M50 oil Subject to technical changes! Warranty ® In accordance with IKA warranty conditions, the warranty pe- The warranty does not cover worn out parts, nor does it apply riod is 24 months. For claims under the warranty please contact to faults resulting from improper use, insufficient care or mainte- your local dealer.
Need help?
Do you have a question about the Dry Block Heater 1 and is the answer not in the manual?
Questions and answers