ARTHUR HOLM Dynamic2 AH12D216A User Manual page 12

Hdcp compliant retractable monitors for furniture integration
Table of Contents

Advertisement

SYSTEM DESCRIPTION
Box Contents
Before the installation of your retractable monitor, please check the
contents of the shipping box, it must contain the following items:
• Monitor
• Power cord
• Remote control (1 per 5 monitors)
• Power supply 100-2 40Vac, 50-60Hz. Output 12V
• User guide
Important note: This device can only work with the power supply
included in the shipping box. This power supply can not be replaced by
any other rather than the original one.
Connections
Before connecting the power:
1. Install the unit on a table or desk, in vertical position.
2. Remove the foam protecting piece before connecting the monitor.
Power connection:
1. Plug the power cable from the power supply into an AC socket of
100-240 Vac, 50-60Hz.
2. Plug the 12V D.C.
cable into the socket on the unit.
Caution! Never place this monitor in horizontal position.
12

Advertisement

Table of Contents
loading

Table of Contents