Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ARTHUR HOLM Dynamic 3
Summary of Contents for ARTHUR HOLM Dynamic 3
- Page 1 Assembling guide Dynamic 3 + DTalk...
- Page 2 Not complying with these direction will result in a lost of the Arthur Holm warranty. Albiral Display Solution S.L. shall not be held liable for any loss or injury incurred as a result of modifications made to goods by anyone other than the supplier or the supplier's authorised representative without the supplier's written permission.
- Page 3 •Being D3 mounted on the table: Mount the (x2) washers and the (x2) wing nuts supplied at the bolts shown. Screw the wing nuts until they are flushed with the end of the bolt. View from below the table (x2) DIN 315 M4 (x2) DIN 9021 4,3 View from below the table...
- Page 4 •Insert DynamicTalk in the indicated position. The top plate must be just above the washers •Turn DynamicTalk until the two open holes on the top plate are in contact with the bolts Assembling DynamicTalk...
- Page 5 •Push carefully the DynamicTalk upward, please take care with the hatch of the cover plate. •There is a guide bolt that has to enter into the hole of the top plate •Keeping pressed up the DynamicTalk, screw the wing nuts with the finger. Assembling DynamicTalk...
- Page 6 •Enter the mounting plate through the DynamicTalk. •If Dynamic talk has a cable to connect the microphone: pass the Microphone cable + connector trough the mounting plate hole. Assembling DynamicTalk...
- Page 7 Follow This step for standard DynamicTalk or DynamicTalk with BOSCH •Fix the mounting plate with washers and screws provided. (x4) DIN 6798 5,3 (x4) DIN 7985 M5x10 •Fix the DynamicTalk to the mounting plate (x2) DIN 7985 M5x12 (x2) DIN 6798 5,3 Assembling DynamicTalk (STANDARD &...
- Page 8 Follow This step for DynamicTalk with DIS or TELEVIC microphone. •Fix the mounting plate with washers and screws provided. •Fix the DynamicTalk to the mounting plate Connect XLR connector from the DynamicTalk to the socket (Microphone IN) (x4) DIN 6798 5,3 (x4) DIN 7985 M5x10 (x2) DIN 7985 M5x12 (x2) DIN 6798 5,3...
- Page 9 www.arthurholm.com...
Need help?
Do you have a question about the Dynamic 3 and is the answer not in the manual?
Questions and answers