Table of Contents
Advertisement
REPLACEMENT PROCEDURE
This procedure requires the following tools: Phillips screwdriver for the M4 screws, 1.5 mm hexagonal wrench, 11-
12 mm monkey wrench, nipper, cutter, wire stripper, soldering iron, industrial dryer and heat-shrinkable tube.
Remove the connectors.
1
Remove the 2 screws securing the VR Bracket and remove the entire Bracket and V.R. (See previous
2
instruction)
Loosen the 1 hexagon socket screws on the Gear Holder and remove the Gear Holder.
3
Remove the nut securing the VR Bracket, then separate the Volume from the VR Bracket and replace it.
4
Check to make sure the value on the Input Test screen is within the range 80H ± 8H when the steering unit
5
is in the straight position.
VOLUME POT WSHR
VOLUME POT NUT
HEX SOCKET SCREW
VOLUME POT
VOLUME POT GEAR
VOLUME POT BKT
7
40
Hide quick links:
Advertisement
Table of Contents
