System Connections - TA Instruments DHR Series Getting Started Manual

System Connections

A schematic of the Asphalt Submersion Cell is shown below.
Figure 1 Schematic of the Asphalt Submersion Cell.
For the AR Series Rheometers, mount the solenoid box on the rear of the rheometer using the four 3-mm
panhead Pozidrive screws supplied with the instrument, as shown below.
Upper drain
Water out
Inline filter
Event B
Figure 2 Solenoid box mounted on rear of rheometer (DHR shown).
For the DHR Series Rheometers, fit the adapter bracket to the back of the instrument before mounting the
solenoid box.
DHR/AR Series Asphalt Submersion Cell Getting Started Guide
Adapter bracket
Lower drain
Event
Not used with
Asphalt Submersion Cell
Page 11