Appendix A: Revised Julabo Circulator (He Style); Introduction; Startup Procedure - TA Instruments DHR Series Getting Started Manual

Appendix B:
REVISED Julabo Circulator (HE Style)

Introduction

The Julabo Computer Controlled Fluid Circulator (CCFC) model FP35-HE (part numbers 500020.901
[110V] or 575004.901 [220V])was updated in October 2009 to include new configuration options and a
new front keypad. This appendix covers the new startup procedure for Julabo CCFC's shipped from
October 2009 and later.

Startup Procedure

Follow the instructions below to configure the Julabo Circulator:
1 Power on the Julabo CCFC. TA SPECIAL displays upon power up, then the firmware versions appear.
2 Open the Julabo menu by pressing the Menu key
3 Use the
4 Press OK
5 Press key to return to the previous menu selection and to exit the menu.
DHR/AR Series Asphalt Submersion Cell Getting Started Guide
keys to scroll through the menus and to change parameter values.
to save changes to the configuration.
on the front panel.
Page 23