Requestsendacquirerresponse - Magtek DynaPro Programmer's Manual

3 - MagneFlex Powder Resources
Parameter
EndSession
Return Value:
The Transaction output.
{"TransactionOutput": {}}
3.8

RequestSendAcquirerResponse

Sends the ARPC to the device.
Using Method POST:
api/mtppscrahost/RequestSendAcquirerResponse(
string DeviceID,
int WaitTime,
int WaitTimeBeforeTransactionComplete,
string IssuerAuthenticationData,
string IssuerScriptTemplate1,
string IssuerScriptTemplate2,
int ApprovalStatus,
string KSN,
string DeviceSerialNumber,
array AdditionalRequestData,
boolean CloseDevice,
boolean EndSession);
SDK - MagneFlex Powder, MIddleware,| PIN PEDs | Programmer's Manual (MagneFlex API)
Page 25
Flag which determines whether an EndSession command is sent to the
device after the request is processed. Default value is "false". When set to
false, this flag may facilitate the display of a custom message after a
request is processed.
"false" = Do no end the session.
"true" = End the session.
Description