Magtek DynaPro Programmer's Manual page 11

2 - How to Set Up the MagneFlex Powder
b) Touch the Bluetooth icon in the system tray and select
2-1).
Figure 2-1 - Launch Manage Bluetooth Devices App from Desktop Mode
9) Locate the serial number on the label on the bottom of the device. Note the final four digits.
10) Read through the list of pairable devices and locate the device called
nnnn is the last four digits of the device's serial number (if the device does not show in the list, power
it off then power it back on). Below the device name you should see the text
11) Select the device and press the
will prompt you
Enter the passcode for your keyboard
SDK - MagneFlex Powder, MIddleware,| PIN PEDs | Programmer's Manual (MagneFlex API)
Page 11
Figure 2-2 – Windows 8 Manage Bluetooth Devices App
Pair button. If the device is configured to run in KB mode, Windows
Add a Bluetooth Device
DynaProMini-nnnn
Ready to pair
.
(see Figure
, where
.