Transducer, Installation; Magnets, Installation - Balluff BTL5-S M A Series User Manual

BTL5-S1_ _-M_ _ _ _A/B/Z-S32/S147/KA_ _
Micropulse Linear Transducer - Rod Style
3 Installation (cont.)
3.2

Transducer, Installation

The smallest permissible distance
between magnet ring and rod
mounting surface is shown in
Fig. 3-1.
The transducer has either a
M18×1.5 thread or a 3/4"-16UNF
thread for mounting. The sealing is
carried cut with the O-ring sup-
plied at the flange facing.
3.3

Magnets, Installation

A magnet is required for each
transducer. This must be ordered
separately. ➥ ➥ ➥ ➥ ➥ Fig. 3-4.
For mounting the magnet we rec-
ommend to use non-magnetizable
material. ➥ ➥ ➥ ➥ ➥ Fig. 3-2.
Threaded hole
M18×1.5 per
ISO 6149
O-ring 15.4×2.1
Threaded hole
3/4"-16UNF per
SAE J475
O-ring 15.3×2.4
Bevel for O-ring
Fig. 3-3: Threaded hole for mounting the BTL with O-ring
BTL-P-1013-4R
Fig. 3-4: Magnet (optional)
Threaded hole
BTL-P-1013-4S BTL-P-1012-4R
5
english