Download  Print this page

Advertisement

OWN ER' S M AN UAL

Advertisement

Table of Contents

   Summary of Contents for Ducati XDIAVEL

  • Page 1 OWN ER’ S M AN UAL...
  • Page 2 Owner’s manual ENGLISH...
  • Page 3 If the motorcycle is resold, the manual must always be handed over to the new owner. This manual must be preserved with care. If it is lost or becomes damaged, contact a Ducati Dealer or authorised Service Centre without delay to obtain a new copy of the manual.
  • Page 4: Table Of Contents

    Table of contents Instrument panel Acronyms and abbreviations used in the Manual Technological Dictionary Function buttons Parameter setting/displaying Main functions Engine rpm indication (RPM) Motorcycle speed Introduction Riding Mode (RIDING MODE) Safety guidelines Warning symbols used in the manual Intended use Gear Rider's obligations Fuel level...
  • Page 5 LAP TIME Customising the Riding Mode: Reset to default Auxiliary functions settings (ALL DEFAULT) Infotainment Display mode setting Cruise Control Light mode setting (DRL) Assisted start (LAUNCH CONTROL - DPL) Service indication (SERVICE) PIN CODE OIL SERVICE zero warning Changing the PIN CODE OIL SERVICE or ANNUAL SERVICE or DESMO Display backlighting setting SERVICE countdown indication...
  • Page 6 Clutch lever Anti-Lock Braking System (ABS) Right-hand switch Stopping the motorcycle Throttle twistgrip Parking Front brake lever Refuelling Rear brake pedal Tool kit and accessories Gear change pedal Adjusting the position of the gearchange pedal and Main use and maintenance rear brake pedal operations Changing the air filter...
  • Page 7 Important notes Available colours Electric system Scheduled maintenance chart Routine maintenance record Scheduled maintenance chart: operations to be carried out by the dealer Routine maintenance record Scheduled maintenance chart: operations to be carried out by the customer Technical data Weights Dimensions Fuel, lubricants and other fluids Engine...
  • Page 8: Introduction

    321. Our highly skilled staff have access to special implements and appropriate equipment required to perform any servicing job at best, and use Ducati Safety guidelines original spare parts only as the best guarantee for full We would like to welcome you among Ducati interchangeability, smooth running and long life.
  • Page 9: Warning Symbols Used In The Manual

    maintenance. In case of any doubts, please contact a Dealer or Authorised Service Centre. Warning symbols used in the manual Several kinds of warnings are used as an alert of the possible hazards for you or other persons such as: Safety labels on the motorcycle;...
  • Page 10: Intended Use

    Intended use Warning This motorcycle was designed for both road use and for light off-road and dirt road use. Heavy duty off- road use is not advised and can result in the rider losing control of the vehicle, thereby increasing the risk of accidents.
  • Page 11: Rider's Obligations

    Rider's obligations Warning All riders must hold a valid licence. Some medications and drugs may cause drowsiness or other effects that slow down reaction Warning time and the rider's ability to control the motorcycle, possibly leading to an accident. Riding without a licence is illegal and is prosecuted by law.
  • Page 12: Rider's Training

    Warning Check that your helmet complies with safety specifications, permits good vision, is the right size for your head, and carries a certification label indicating that it conforms to the standards in force in your state. Road traffic laws differ from state to state. Learn about traffic laws in your state before riding and always obey them.
  • Page 13: Apparel

    Apparel Important Riding gear is very important for safety. Unlike cars, Have your passenger wear proper protective a motorcycle offers no impact protection in an clothing. accident. Proper riding gear includes helmet, eye protection, gloves, boots, long sleeve jacket and long trousers. The helmet must meet the requirements listed at page 10;...
  • Page 14: Safety "best Practices

    Closely follow the indications provided at chapter "Riding the motorcycle" during the running-in Important period. Failure to follow these instructions releases Ducati Rider must hold the handlebar with both hands Motor Holding S.p.A. from any liability whatsoever for at ALL TIMES while riding.
  • Page 15 Important Important Be very careful when tackling road junctions, or Visually inspect the tyres at regular intervals for when riding in areas near exits from private grounds, detecting cracks and cuts, especially on the side car parks or on slip roads to access motorways. walls, bulges or large spots that are indicative of internal damage.
  • Page 16: Refuelling

    Refuelling Warning Refuel outdoors with engine off. Fuel is highly flammable, in case of accidental Do not smoke or use open flames while refuelling. spillage of fuel on your clothes it is necessary to Be careful not to spill fuel on engine or exhaust pipe. change into clean clothes.
  • Page 17: Carrying The Maximum Load Allowed

    Carrying the maximum load allowed Important Your motorcycle is designed for long-distance riding, Be sure to secure the luggage to the supports carrying the maximum load allowed in full safety. provided on the motorcycle as firmly as possible. Even weight distribution is critical to preserving these Improperly secured luggage may affect stability.
  • Page 18 Warning Coolant Prolonged or repeated contact with used engine Engine coolant contains ethylene glycol, which may oil may cause skin cancer. If working with engine oil ignite under particular conditions, producing invisible on a daily basis, we recommend washing your hands flames.
  • Page 19 Warning The battery gives off explosive gases; never cause sparks or allow naked flames and cigarettes near the battery. When charging the battery, ensure that the working area is properly ventilated.
  • Page 20: Vehicle Identification Number

    Vehicle identification number Note These numbers identify the motorcycle model and should always be indicated when ordering spare parts. It is recommended to record the frame number of your motorcycle in the space below. Frame number Fig. 1...
  • Page 21: Engine Identification Number

    Engine identification number Note These numbers identify the motorcycle model and should always be indicated when ordering spare parts. It is recommended to record the number of your motorcycle's engine in the space below. Engine number Fig. 2...
  • Page 22: Instrument Panel (dashboard)

    Instrument panel (Dashboard) Important If the ENGINE OIL light stays ON, stop the engine or it may suffer severe damage. Instrument panel 1) Display. 2) NEUTRAL LIGHT N (GREEN). Comes on when in neutral position. 3) CRUISE CONTROL LIGHT (GREEN). Comes on to indicate operation of the Cruise Control.
  • Page 23 8) DTC LIGHT (AMBER YELLOW). This light indicates DTC system enabling/disabling status. Speed below 5 Km/h (3 mph) Light OFF Light flashing Light steady on DTC enabled and functioning DTC enabled but not yet function- DTC disabled and/or not functioning ing since initialisation is in progress due to a fault in the BBS control unit or functioning with degraded per-...
  • Page 24 10) ABS LIGHT (AMBER YELLOW). Indicates ABS status. Speed below 5 Km/h (3 mph) Light OFF Light flashing Light steady on ABS enabled but not yet function- ABS disabled and not functioning ing since initialisation is in progress due to a fault in the ABS control unit or there is a fault of the IMU control unit Speed above 5 Km/h (3 mph)
  • Page 25 Key-OFF status Light ON flashing 12) OVER REV / DTC INTERVENTION / IMMOBILIZER SYSTEM (RED). Key-off status for over Light OFF 1 hour No intervention Light OFF 13) DRL LIGHT (GREEN) Only for the X Diavel S model (except for China, Japan Spark advance cut Light steady ON and Canada versions).
  • Page 26 CORE Km/h x1000 SPORT DPL LEVEL 3 302721 Fig. 3...
  • Page 27: Acronyms And Abbreviations Used In The Manual

    Power Mode Engine Control Unit The Power Modes are the different engine maps the DUCATI Power Launch rider can select to change power level and delivery to suit his/her own riding style and surface conditions. Daytime Running Light...
  • Page 28 X Diavel features a system for maintaining the cruise system preventing wheel lockup while riding with the speed, the Ducati Cruise Control. System can be motorcycle not leaning over. The X Diavel ABS also enabled with engaged gear equal to or higher than the features a "cornering"...
  • Page 29 Ducati Power Launch (DPL) The Ducati Power Launch (DPL) helps the rider in the delicate sport starting phase from a standstill to control the power delivered by the vehicle.
  • Page 30: Function Buttons

    Function buttons 1) UP CONTROL SWITCH " " Button used to display and set instrument panel parameters with the position " ". 2) DOWN CONTROL SWITCH " " Button used to display and set instrument panel parameters with the position " ".
  • Page 31 6) CRUISE CONTROL BUTTON - RES (Resume) / + (more) (Fig. 4) Button used to increase set cruise speed for the Cruise Control. 7) CRUISE CONTROL BUTTON - SET (Setup) / - (less) (Fig. 4) Button used to set/decrease set cruise speed for the Cruise Control.
  • Page 32: Parameter Setting/displaying

    Parameter setting/displaying CORE Upon key-on, the instrument panel displays the DUCATI logo and switches on the LED warning lights in two steps ("initial check routine"). At the end of the check, the instrument panel shows the main screen in the CORE mode which is the default one for all riding styles.
  • Page 33 The main screen can have four different layouts: CORE, TRACK, FULL and CITY. Data displayed on the main screen for CORE layout are as follows: Rev counter (RPM). Motorcycle speed. Gear indication. Set Riding Mode. Fuel level. Menu 1: Odometer, Engine coolant temperature, Trip meter 1, Trip meter 2, Range, Average consumption, Instant fuel consumption, Average speed, Trip time,...
  • Page 34 CORE Km/h x1000 SPORT DPL LEVEL 3 302721 Fig. 7...
  • Page 35 Data displayed on the main screen for TRACK layout are as follows: Rev counter (RPM). Motorcycle speed. Gear indication. Set Riding Mode. DTC level. ABS level. Menu 1: Odometer, LAP Time (only if active), Engine coolant temperature, Trip meter 1, Trip meter 2, Range, Average consumption, Instant fuel consumption, Average speed, Trip time, Ambient air Temperature.
  • Page 36 TRACK Km/h ABS 3 SPORT DPL LEVEL 3 DTC 1 302721 Fig. 8...
  • Page 37 Data displayed on the main screen for FULL layout LAP. are as follows: Rev counter (RPM). Motorcycle speed. Gear indication. Set Riding Mode. Fuel level. Clock. Menu 1: Odometer, Engine coolant temperature, Player On / Off (active only if the Bluetooth module is available and at least one Smartphone is connected), Range, Trip meter 1, Trip meter 2.
  • Page 38 FULL TOURING DPL 3 - ON Km/h 00:00 CONS. AVG L/100 P.M. 302721 Fig. 9...
  • Page 39 Data displayed on the main screen for CITY layout are as follows: Motorcycle speed. Gear indication. Set Riding Mode. Fuel level. Clock. Menu 1: Odometer, Engine coolant temperature, Player On / Off (active only if the Bluetooth module is available and at least one Smartphone is connected), Trip meter 1, Trip meter 2, Range, Average consumption, Instant fuel consumption, Average speed, Trip time,...
  • Page 40 CITY TOURING Km/h 00:00 P.M. 302721 Fig. 10...
  • Page 41 From the main screen, with CORE layout, press button (1) on LH switch to view Menu 1 information. Odometer; Engine coolant temperature; TRIP 1; TRIP 2; RANGE; Average Fuel Consumption (CONS AVG); Instant fuel consumption (CONS); Average speed (SPEED AVG); Trip time (TRIP TIME);...
  • Page 42 CORE Km/h x1000 SPORT DPL LEVEL 3 302721 TRIP 1 TRIP 2 RANGE CONS. AVG CONS. SPEED AVG TRIP TIME T AIR Fig. 11...
  • Page 43 From the main screen, with TRACK layout, press button (1) on LH switch to view Menu 1 information. Odometer; LAP time (only if active); Engine coolant temperature; TRIP 1; TRIP 2; RANGE; Average Fuel Consumption (CONS AVG); Instant fuel consumption (CONS); Average speed (SPEED AVG);...
  • Page 44 TRACK Km/h ABS 3 SPORT DPL LEVEL 3 DTC 1 302721 TRIP 1 TRIP 2 RANGE CONS. SPEED AVG CONS. AVG TRIP TIME T AIR Fig. 12...
  • Page 45 From the main screen, with FULL layout, press button (1) on LH switch to view Menu 1 information. Odometer; Engine coolant temperature; PLAYER ON/OFF (active only with connected Smartphone); RANGE; TRIP 1; TRIP 2. Press button (2) on LH switch to view Menu 2 information.
  • Page 46 FULL TOURING DPL 3 - ON Km/h 00:00 CONS. AVG L/100 P.M. 302721 PLAYER RANGE TRIP 1 TRIP 2 CONS. AVG CONS. SPEED AVG TRIP TIME T AIR Fig. 13...
  • Page 47 From the main screen, with CITY layout, press button (1) on LH switch to view Menu 1 information. Odometer; Engine coolant temperature; Player On / Off (active only if the Bluetooth module is available and at least one Smartphone is connected) TRIP 1;...
  • Page 48 CITY TOURING Km/h 00:00 P.M. 302721 TRIP 1 TRIP 2 PLAYER RANGE CONS. AVG CONS. SPEED AVG TRIP TIME T AIR Fig. 14...
  • Page 49 For the FULL display mode, the instrument panel stores Menu 1 and Menu 2 settings in use upon KEY- OFF. On the following KEY-ON, previously stored Menu 1 e Menu 2 pages are displayed. In case of sudden and unexpected power OFF, the instrument panel displays the default settings for Menu 1 and Menu 2 upon the following KEY-ON;...
  • Page 50 When the standard screen of set layout is displayed, hold button (4) for 2 seconds to enter the Setting menu, where you can set any function. SETTING MENU Note RIDING MODE BACKLIGHT INFO MODE DATE SET You can enter the SETTING MENU only if CLOCK SET vehicle actual speed is <= (lower than or equal to) 5 PIN CODE...
  • Page 51 If the key is not acknowledged upon Key-On and once the check routine is over, if the PIN CODE function is active the instrument panel shows a screen where it is possible to enter the release PIN CODE. Use button (1) and button (2) to enter the code digit and confirm by pressing button (4).
  • Page 52: Main Functions

    Main functions the menus display the following functions: - Odometer (TOT) Information displayed in the standard screen of the - Engine coolant temperature selected display layout (CORE, TRACK, FULL or CITY) - Residual range (RANGE) are the following: - Trip meter 1 (TRIP1) Main information - Trip meter 2 (TRIP2) Engine rpm indication (RPM)
  • Page 53: Engine Rpm Indication (rpm)

    Engine rpm indication (RPM) The instrument panel receives the engine rpm information and displays it on the relevant bargraph (in TRACK, FULL and CORE display modes only). The information is displayed by the bargraph filling from the left to the right according to the engine rpm and with the enlargement of the numerical digit of the relevant miles (e.g., if the RPM value is "8000"...
  • Page 54 CORE layout indicates rpm in a different way CORE compared to TRACK and FULL layouts. CITY layout does not provide for rpm indication. Km/h x1000 SPORT 302721 Km/h x1000 SPORT 302721 Km/h x1000 SPORT 302721 Fig. 17...
  • Page 55 FULL TOURING TOURING TOURING Km/h Km/h Km/h 00:00 00:00 00:00 CONS. AVG L/100 CONS. AVG L/100 CONS. AVG L/100 P.M. P.M. P.M. 302721 302721 302721 TRACK Km/h Km/h Km/h ABS 3 ABS 3 ABS 3 SPORT SPORT SPORT DTC 1 DTC 1 DTC 1 302721...
  • Page 56 When the threshold before the rpm limiter is reached, the corresponding warning lights will turn on. Fig. 19...
  • Page 57: Motorcycle Speed

    Motorcycle speed The instrument panel receives information about the actual motorcycle speed (calculated in km/h) and displays the value increased by 5% and converted in the set unit of measurement (km/h or mph). A string of dashes "- - -" is displayed with the set unit of measurement if: speed is equal to 299 km/h or 186 mph or if instrument panel is not receiving the speed value...
  • Page 58 CORE CORE Km/h x1000 SPORT 302721 Km/h x1000 SPORT CORE 302721 Km/h x1000 SPORT 302721 Fig. 20...
  • Page 59: Riding Mode (riding Mode)

    Every Riding Mode contains the following parameters, set by Ducati or customised by the user through the setting function pages: a specific level of intervention for the DTC traction control (1, 2, 3, 4, 5, 6, 7, 8, OFF);...
  • Page 60 CORE TRACK Km/h Km/h x1000 ABS B SPORT TOURING DPL LEVEL 3 SPORT DTC 1 302721 302721 TOURING FULL CITY URBAN URBAN TOURING Km/h Km/h 00:00 P.M. 00:00 CONS. AVG L/100 P.M. 302721 302721 Fig. 21...
  • Page 61 Selecting the Riding Mode Any time CONFIRM MENU button (4) is pressed, the selected riding mode is highlighted together with the Press CONFIRM MENU button (4) to view the menu associated parameters (A, Fig. 22). for selecting the Riding Mode (A). The instrument Once the desired riding mode (A, Fig.
  • Page 62 CORE ENGINE MED SPORT Km/h TOURING DTC 6 Km/h x1000 SPORT URBAN ABS 3 302721 SPORT ENGINE HIGH ENGINE MED SPORT Km/h Km/h TOURING DTC 2 TOURING DTC 4 URBAN ABS 2 URBAN ABS 3 Km/h x1000 TOURING 302721 Fig. 22...
  • Page 63 Infotainment indication (paired devices) (H): each single Riding Mode. The stored settings may be shown only if the Bluetooth function is available; the factory ones (Ducati default settings) or the ones customised by the owner. In the screen that allows changing the Riding Mode,...
  • Page 64 TRACK SPORT ENGINE HIGH Km/h Km/h TOURING DTC 2 ABS 3 SPORT ABS 2 URBAN DTC 1 302721 ENGINE MED SPORT FULL Km/h TOURING DTC 4 ABS 3 URBAN TOURING Km/h 00:00 CONS. AVG L/100 P.M. Fig. 23...
  • Page 65 When system requests rider to confirm the riding mode change, the procedure will output an error if: the vehicle is stopped, the instrument panel only checks whether the throttle control is closed / CLOSE open by indicating CLOSE THROTTLE if so; THROTTLE the vehicle is moving, the instrument panel checks whether the throttle control is open /...
  • Page 66: Dtc

    If DTC is in fault or the Black Box is in fault, the instrument panel will display DTC Err and DTC warning light will be steady on. Warning In case of system malfunction, contact a Ducati Dealer or Authorised Service Centre.
  • Page 67 TRACK DTC 1 DTC 2 Km/h DTC 3 ABS 3 SPORT DTC 4 DTC 1 302721 DTC 5 DTC 6 DTC 7 DTC 8 Km/h DTC OFF ABS 3 Km/h SPORT DTC 1 302721 DTC Err ABS 3 SPORT 302721 Fig.
  • Page 68 Warning DTC is a rider aid that can be used on the track, on the road and off road. The system is designed to make riding easier and to enhance safety, but in no way relieves the rider of the obligation to drive responsibly and to maintain a high standard of riding in order to avoid accidents, whether caused by his own errors or those of other road users, through...
  • Page 69 The following table indicates the most suitable level of DTC intervention for the various riding modes as well as the default settings in the "Riding Modes" that can be selected by the rider. RIDING MODE DEFAULT SPORT Sports style for very expert riders. Sys- tem permits sliding sideways.
  • Page 70 Tips on how to select the sensitivity level spin. Between level 8 and level 1 there are intermediate levels. DTC intervention decreases from level 8 to level 1. Levels 1, 2 and 3 allow both Warning spinning and skidding of the rear wheel out of a All levels of the DTC system of your vehicle corner: these levels are recommended only for expert have been calibrated with original equipment tyres...
  • Page 71 If the track/path features bends all taken at similar Tips for use on wet road speeds, it will be easier to find a level suitable for all Level 7 is recommended when road is slightly wet or bends; while a track/path with bends all requiring damp and level 8 on wet road.
  • Page 72: Abs

    The ABS function status is shown only in the TRACK display mode. If the ABS is in fault, the instrument panel will display ABS Err and ABS warning light will be steady on. Warning In case of system malfunction, contact a Ducati Dealer or Authorised Service Centre.
  • Page 73 TRACK ABS 1 ABS 2 Km/h ABS 3 ABS 1 SPORT ABS OFF Km/h DTC 3 302721 ABS Err ABS 1 SPORT DPL LEVEL 3 DTC 3 302721 Km/h Km/h SPORT SPORT DPL LEVEL 3 DTC 3 302721 302721 Fig. 26...
  • Page 74 Using the brakes correctly under adverse conditions of the brake lever and pedal. The front and rear brakes is the hardest – and yet the most critical - skill to use separate control systems. master for a rider. Braking is one of the most difficult The X Diavel ABS also features a "cornering"...
  • Page 75 When tackling long, high-gradient downhill road tracts, shift down gears to use engine braking. Apply one brake at a time and use brakes sparingly. Keeping the brakes applied all the time would cause the friction material to overheat as well as a possible generation of vapour lock (brake fluid boiling) with a considerable reduction of the braking power.
  • Page 76 The following table indicates the most suitable level of ABS intervention for the various riding types as well as the default settings in the "Riding Mode" that can be selected by the rider: RIDING MODE FEATURE DEFAULT The ABS is disabled EXPERT This level is thought for extremely expert users.
  • Page 77 OE tyres and/or with the ones ABS level 1 is conceived for very expert riders and recommended by Ducati. In particular, OE tyres for ABS is active only on the front wheel to help this motorcycle are TL PIRELLI Diablo Rosso II D in performance.
  • Page 78: Gear

    Gear CORE The instrument panel receives information about the gear engaged and displays the corresponding value. If a gear is engaged, the displayed value may range from 1 to 6, while if in neutral N is displayed. A string of flashing dashes "--" is displayed if gear teach-in procedure has not been carried out yet, or if Km/h x1000...
  • Page 79: Fuel Level

    Fuel level CORE This function displays the fuel level. The low fuel light turns on when the level goes down to 2 steady marks that become orange and the fuel pump symbol is steady and orange: this means that there are approximately 4 litres in the tank. If the level goes further down, the last mark will be Km/h x1000...
  • Page 80 Note In case of fault or error of the fuel level sensor, no level marks will be displayed, the fuel pump symbol will be red and flashing, and the Fuel Range warning light will be on.
  • Page 81: Clock

    Clock FULL The instrument panel receives information about the time to be displayed. The instrument panel shows the time in the following TOURING format: hh (hours) : mm (minutes); Km/h followed by a.m. (from 12:00 to 11:59) or p.m. (from 12:00 to 11:59). 00:00 CONS.
  • Page 82: Menu Functions

    Menu functions For each of the three riding modes (SPORT, TOURING, URBAN) menu functions can be displayed in one of the following four modes: CORE; TRACK; FULL; CITY. Available functions are: Odometer (TOT); Engine Coolant temperature Residual range (RANGE); Trip meter 1 (TRIP1); Trip meter 2 (TRIP2);...
  • Page 83 CORE TRACK Km/h Km/h x1000 ABS 3 SPORT SPORT DTC 1 302721 302721 FULL CITY TOURING TOURING Km/h Km/h 00:00 P.M. 00:00 CONS. AVG L/100 P.M. 302721 302721 Fig. 30...
  • Page 84: Odometer (tot)

    Odometer (TOT) CORE The odometer counts and displays the total distance covered by the motorcycle with the set unit of measurement (km or mi). The odometer number (in km or miles) is displayed with the message TOT and the indication of the unit of measurement.
  • Page 85 The reading is not lost in case of a power OFF (Battery OFF). Note If a string of flashing dashes " ----- " is displayed within odometer function, please contact a Ducati Dealer or Authorised Service Centre.
  • Page 86: Engine Coolant Temperature

    Engine Coolant temperature CORE The instrument panel receives information about the engine temperature (already calculated in °C) and displays the value in the set unit of measurement (°C or °F), followed by the unit of measurement and the engine temperature symbol. Km/h x1000 The temperature display range goes from 40 °C to...
  • Page 87 If the coolant temperature sensor is in fault, a string of flashing dashes "- - -" is displayed with the set unit of measurement and the MIL light turns on. If the instrument panel is not receiving coolant temperature value, a string of steady dashes "- - -" is displayed, followed by the unit of measurement.
  • Page 88: Trip Meter 1 (trip 1)

    Trip meter 1 (TRIP 1) CORE The trip meter counts and displays the partial distance covered by the motorcycle with the set unit of measurement (km or mi) and is used as a basis to calculate average fuel consumption, average speed and trip time.
  • Page 89 The TRIP1 counter is automatically reset in case the system unit of measurement is changed manually or after a Battery-OFF: the counter will then start back from zero, considering the new units of measurement.
  • Page 90: Trip Meter 2 (trip 2)

    Trip meter 2 (TRIP 2) CORE The trip meter counts and displays the partial distance covered by the motorcycle with the set unit of measurement (km or mi). The TRIP2 number (in km or miles) is displayed with the message TRIP2 and the indication of the unit of Km/h x1000 measurement.
  • Page 91: Residual Range (range)

    Residual range (RANGE) CORE This function displays the range according to the remaining fuel in the tank. Information is indicated as RANGE, in the set unit of RANGE measurement. If there is any function fault, the instrument panel will Km/h 999.9 x1000 RANGE...
  • Page 92: Average Fuel Consumption

    Average fuel consumption when the motorcycle is not moving and the engine is OFF are not considered). The instrument panel calculates and displays the motorcycle average fuel consumption, the set unit of measurement and CONS. AVG. The calculation is made considering the quantity of fuel used and the distance travelled since TRIP1 was last reset.
  • Page 93 CORE CITY TOURING Km/h Km/h 00:00 L/100 x1000 P.M. SPORT CONS. L/100 CONS. L/100 Km/l TRACK FULL MPG UK MPG US TOURING Km/h Km/h ABS 3 00:00 CONS. SPORT L/100 P.M. DTC 1 CONS. 302721 L/100 Fig. 36...
  • Page 94: Instantaneous Fuel Consumption

    Instantaneous fuel consumption The instrument panel calculates and displays the motorcycle instantaneous fuel consumption, the set unit of measurement and CONS. text. The calculation is made considering the quantity of fuel used and the distance travelled during the last second. Value is expressed in the set unit of measurement: litres / 100 km or mpg UK or mpg US.
  • Page 95 CORE CITY TOURING Km/h Km/h 00:00 L/100 x1000 P.M. SPORT CONS. L/100 L/100 CONS. Km/l TRACK FULL MPG UK MPG US TOURING Km/h Km/h ABS 3 00:00 SPORT L/100 CONS. P.M. DTC 1 302721 CONS. L/100 Fig. 37...
  • Page 96: Average Speed

    Average speed (moments when the motorcycle is not moving and the engine is OFF are not considered). The instrument panel calculates and displays the motorcycle average speed, the set unit of measurement and SPEED AVG text. The calculation considers the distance and time since TRIP1 was last reset.
  • Page 97 CORE CITY TOURING Km/h Km/h 00:00 x1000 P.M. SPORT SPEED Km/h SPEED Km/h Km/h TRACK FULL TOURING Km/h Km/h ABS 3 00:00 SPEED SPORT Km/h P.M. DTC 1 SPEED 302721 Km/h Fig. 38...
  • Page 98: Trip Time (trip Time)

    Trip time (TRIP TIME) The instrument panel calculates and displays the trip time as hhh:mm followed by TRIP TIME. The calculation considers the time since TRIP1 was last reset. When TRIP1 is reset, this value is reset as well. The time count active phase occurs when the engine is running and the motorcycle is stopped (the time is automatically stopped when the motorcycle is not moving and the engine is OFF and restarts when the...
  • Page 99 CORE CITY TOURING Km/h Km/h 00:00 x1000 P.M. SPORT TRIP 0:00 0:00 TRIP TIME TIME TRIP 511:00 TIME TRACK FULL TOURING Km/h Km/h ABS 3 00:00 TRIP 0:00 SPORT P.M. TIME DTC 1 TRIP 0:00 302721 TIME Fig. 39...
  • Page 100: Ambient Air Temperature

    Ambient air temperature The instrument panel displays the ambient temperature in the set unit of measurement (°C or °F), followed by the set unit of measurement, the message T AIR and the thermometer symbol. The temperature value is displayed when ranging from -39 °C to +125 °C (or -38 °F ÷...
  • Page 101 CORE CITY TOURING Km/h Km/h 00:00 x1000 P.M. SPORT T AIR °C °C T AIR T AIR °F TRACK FULL TOURING Km/h Km/h ABS 3 00:00 SPORT °C T AIR P.M. DTC 1 302721 T AIR °C Fig. 40...
  • Page 102: Lap Time

    LAP TIME TRACK The LAP function is visible only for the TRACK layout under menu 1. LAP function information is available when the function is active. Km/h When the LAP function is active, upon the first press on FLASH button (3) main screen will display LAP ABS 3 SPORT flashing at the top left-hand side, menu 1 will display...
  • Page 103 If the LAP function is not selected from the menu, the no. 15 lap times (time between consecutive start instrument panel will go back to the functions present and stop); before the FLASH button (3) was pressed. no. 15 values for max. RPM (maximum RPM It is possible to scroll the other menu functions at any value reached in every lap);...
  • Page 104: Auxiliary Functions

    Auxiliary functions TRACK The instrument panel displays the LAP function status (LAP recording on or off). Km/h LAP message at top left-hand side is on if the LAP function is active, and is off if the LAP function is not ABS 3 SPORT active;...
  • Page 105: Infotainment

    Infotainment X Diavel fits the Ducati Multimedia System (DMS) as standard, thanks to which the user can answer phone calls, select and listen to music tracks, and receive SMS notifications by means of the Bluetooth technology. The instrument panel displays the Infotainment...
  • Page 106 CITY CORE TOURING Km/h Km/h x1000 00:00 P.M. SPORT 302721 302721 FULL TRACK TOURING Km/h Km/h 00:00 ABS 3 P.M. SPORT DTC 1 302721 Fig. 43...
  • Page 107 If Bluetooth is active, apart from the Bluetooth icon, FULL also connected device indication is displayed, such as smartphone, rider and passenger helmet earphones, Ducati GPS navigator. It is possible to connect up to a maximum of 4 TOURING devices.
  • Page 108 Phone To terminate the call, keep button (1) pressed for 2 seconds. Use the PHONE function: If main screen is set to FULL or CITY layout, during 5 to manage incoming calls by means of button (1) seconds after hang-up, the rectangle corresponding and button (2);...
  • Page 109 FULL CITY TOURING TOURING Km/h Km/h 00:00 00:00 P.M. P.M. 302721 CITY TOURING Km/h 00:00 P.M. 302721 Fig. 45...
  • Page 110 Player increase volume: press button (1); decrease volume: press button (2). The Player can be activated in the FULL and CITY modes. If at least one Smartphone device is The Player can be cyclically set to pause/play by connected (blue icon on main screen), Menu 1 will pressing button (4) for two seconds.
  • Page 111 CITY FULL TOURING TOURING Km/h Km/h 00:00 P.M. 00:00 TRACK TITLE P.M. PLAYER TRACK TITLE CITY FULL TOURING TOURING Km/h Km/h 00:00 P.M. 00:00 CONS. AVG L/100 P.M. PLAYER PLAYER Fig. 46...
  • Page 112 Check that the phone supports the PBAP profile. E-mails are notified only if configured on the If so, the DUCATI MULTIMEDIA SYSTEM, during the telephone source application. Check also that your pairing phase, will send an access request to such phone supports the MAP profile.
  • Page 113 7) I do not receive any message notification on my iPhone. Why? Select Bluetooth in the Setting Menu. In the list "My devices" select "i" next to "Ducati Media System". Flag "Show notifications".
  • Page 114: Cruise Control

    Cruise Control light (A) turns on on the instrument Km/h panel. x1000 SPORT Upon first activation, the Ducati Cruise Control 302721 system is in stand-by mode and is ready to receive the target speed value to be maintained automatically Fig. 47 if the operating conditions are met (see below).
  • Page 115 Once the system is on, it is possible to set the current CORE speed as target speed by pressing the SET button (7). If no target speed had been previously set, it will be possible to set the current speed as target also by pressing the RES button (6) instead of button SET (7).
  • Page 116 Important In case of a long DTC (Traction Control) event, the Cruise Control will automatically turn off. It is possible to enable the Ducati Cruise Control only if the below conditions are met: second gear or higher engaged; vehicle speed higher than or equal to 50 Km/h (30 mph) or lower than or equal to 200 Km/h (125 mph).
  • Page 117: Assisted Start (launch Control - Dpl)

    DPL to OFF and shows the "main screen" again. This Function allows activating the assisted start The DPL is set to OFF by default by Ducati. function (called DPL - Ducati Power Launch). By pressing button (12) it is possible to access the Launch Control menu only if the vehicle speed is (less than or equal to) 5 km/h.
  • Page 118 CORE LAUNCH WAITING Km/h - pull the clutch - x1000 SPORT - engage 1 gear 302721 - open full throttle - EXIT AVAILABLE LAUNCHES: DPL ON - LEVEL 1 READY TO LAUNCH DPL ON - LEVEL 2 Release the CLUTCH DPL ON - LEVEL 3 and START EXIT...
  • Page 119 Note If the DTC is set to "OFF", the DPL function can not be activated. If the DTC is set to OFF and you press button (12), DTC OFF the instrument panel shows for five seconds the indication DTC OFF – DPL NOT AVAILABLE; when DPL not available the five seconds are over, the instrument panel goes back to the main screen.
  • Page 120 Note If the available launches are finished, the instrument panel shows the message NO LAUNCHES AVAILABLE. NO LAUNCHES AVAILABLE EXIT Fig. 52...
  • Page 121 The Ducati Power Launch (DPL) helps the rider in the delicate sport starting phase from a standstill to control the power delivered by the vehicle. The DPL system works with three intervention levels, each calibrated to offer a different start assist degree.
  • Page 122 Warning or abruptly. The engine torque is adjusted also in the second phase, by maximising the delivered power The DPL system is to be used exclusively on and limiting the vehicle wheeling or rear wheel straight and level paths, on optimal grip conditions of slipping.
  • Page 123 vehicle speed at zero; vehicle speed higher than 120 km/h; ● ● vertical position; third gear engaged. ● ● engine on; ● The DPL system is switched off also if, after releasing DTC set to ON. ● the clutch, the rider decides to interrupt the start If the count of the residual assisted starts is above phase by closing the throttle and bringing the vehicle zero, the rider can select on the instrument panel the...
  • Page 124 slipping during the starting phase. Levels 2 and 1 Warning provide a limited intervention of the system. The DPL is a rider assist system. The system is designed to make riding easier and to enhance safety, To identify the DPL level most suitable to your riding but in no way relieves the rider of the obligation to style we recommend to activate the system, select drive responsibly and to maintain a high standard of...
  • Page 125: Service Indication (service)

    Service indication (SERVICE) This indication shows the user that the motorcycle is due for service and must be taken to a Ducati Authorised Service Centre. The service warning indication can be reset only by the Authorised Ducati Service Centre during servicing.
  • Page 126 CORE TRACK Km/h Km/h x1000 ABS 3 SPORT SPORT DTC 1 302721 302721 FULL CITY TOURING TOURING DPL 3 - ON Km/h Km/h 00:00 P.M. 00:00 CONS. AVG L/100 P.M. 302721 302721 Fig. 53...
  • Page 127: Oil Service Zero Warning

    The first service warning is the Oil Service (OIL) zero and is triggered as soon as the odometer reaches the first 1,000 km (600 mi). Warning is displayed until "Reset" by the Ducati authorised service centre, during maintenance. Fig. 54...
  • Page 128: Oil Service Or Annual Service Or Desmo Service Countdown Indication

    OIL SERVICE or ANNUAL SERVICE or DESMO SERVICE countdown indication -1000 After Oil Service zero indication first reset (at 1,000 km - 600 mi), the instrument panel activates the following indications in yellow for 5 seconds upon Key-ON: -30dd the count of the mileage in kilometres (miles) remaining before the next OIL SERVICE (A) 1000 km (600 mi) earlier than the service threshold;...
  • Page 129: Oil Service Or Annual Service Or Desmo Service Indication

    To know the kilometres missing until the service DESMO threshold or maintenance date, access the Setting menu and select the "INFO SERVICE" function page 193. Fig. 56 Required service warning is triggered and displayed in red until "Reset" by the Ducati authorised service centre, during maintenance.
  • Page 130: Warnings/alarms (warning)

    Warnings/Alarms (WARNING) The instrument panel manages a number of warnings / alarms, aimed at giving useful information to the rider during use. Upon Key-On, if there are any active warnings, the instrument panel displays the present warnings. During normal use, whenever a warning is triggered, the instrument panel automatically displays the warning.
  • Page 131 CORE TRACK Km/h Km/h x1000 ABS 3 SPORT SPORT DTC 1 302721 302721 FULL CITY TOURING TOURING Km/h Km/h 00:00 P.M. 00:00 CONS. AVG L/100 P.M. 302721 302721 Fig. 57...
  • Page 132 This function warns the rider when there might be ice on the road, due to the low external temperature. This warning turns on when temperature drops to 4°C (39°F) and turns off when temperature raises to 6°C (43°F). Warning This warning does not eliminate the possibility of icy road areas even with temperatures above 4°C (39°F);...
  • Page 133 Warning is activated when battery voltage is approx. lower than/equal to 11.0 Volt. Note In this case, Ducati recommends charging battery in the shortest delay using the special instrument as engine could not be started. Fig. 59...
  • Page 134 The activation of this "warning" indicates that the Hands Free system does not detect the "active key" near the vehicle. Note In this case, Ducati recommends making sure that the active key is nearby (and that it was not lost) or that it works properly. Fig. 60...
  • Page 135 Note In this case, Ducati recommends changing battery in the shortest delay. To change battery, refer to paragraph "Replacing the battery in the active key" page 230.
  • Page 136 Date setting This function prompts the user to enter the date via the Setting Menu. Note In this case Ducati recommends to stop and enter the calendar date using the function "DATESET". Fig. 62...
  • Page 137 Hands Free System was not able to disengage the steering lock. Warning In this case, Ducati recommends switching vehicle off and on again (Key-Off / Key-On), keeping handlebar fully turned. If warning is still present (and steering does not "unlock"), contact a Ducati Authorised Service Centre. Fig. 63...
  • Page 138: Error Warnings

    During normal operation, when an error is triggered, the instrument panel turns on the MIL light (B) or the Generic Error light (A). Warning When one or more errors are displayed, always contact a Ducati Dealer or authorised Service Centre.
  • Page 139 CORE TRACK Km/h Km/h x1000 ABS 3 SPORT SPORT DTC 1 302721 302721 FULL CITY TOURING TOURING Km/h Km/h 00:00 P.M. 00:00 CONS. AVG L/100 P.M. 302721 302721 Fig. 64...
  • Page 140: Viewing Side Stand Status

    Viewing side stand status CORE The instrument panel shows the side stand status and if side stand is down/open, the icon SIDE STAND is displayed on a red background. In case of Side stand sensor fault, the instrument panel will display the stand down/up indication with MIL light on.
  • Page 141: Light Mode Indication (drl)

    Light mode indication (DRL) The instrument panel indicates if the DRL control is CORE set to AUTO or MANUAL by showing the relevant icon. When the DRL lights are in AUTO mode, the instrument panel shows the green icon with letter "A". When the DRL lights are in MANUAL mode, the instrument panel shows the amber icon with letter "M".
  • Page 142: Setting Menu

    Setting menu INFO BATTERY This menu allows enabling, disabling and setting some motorcycle functions. BLUETOOTH version (active only for X To enter the Setting Menu it is necessary to hold Diavel S) button (4) for two seconds, with Key-ON and motorcycle actual speed (lower than or equal to) 5 Important km/h (3.1 mph): within this menu, it is no longer...
  • Page 143 CORE Km/h x1000 SPORT 302721 SETTING MENU RIDING MODE BACKLIGHT INFO MODE DATE SET CLOCK SET PIN CODE INFO SERTVICE DRL CONTROL UNIT SETTING INFO BLUETOOTH EXIT Fig. 67...
  • Page 144 Press buttons (1) and (2) to highlight the customisable Date setting (DATE SET) parameters one by one: in particular, use button (2) Clock setting (CLOCK SET) to highlight the following item and button (1) to Service information indication (INFO SERVICE): highlight the previous item.
  • Page 145 SETTING MENU RIDING MODE BACKLIGHT INFO MODE DATE SET CLOCK SET PIN CODE INFO SERTVICE DRL CONTROL UNIT SETTING INFO BLUETOOTH EXIT SETTING MENU > LAP LAP DATA ERASE ALL EXIT Fig. 68...
  • Page 146: Customising The Riding Mode

    Customising the RIDING MODE All settings of every riding mode can be customised. You enter the Setting Menu. SETTING MENU Select "RIDING MODE" option, by pressing button (1) RIDING MODE BACKLIGHT or (2). Once function is highlighted, press button (4). INFO MODE DATE SET Enter the "RIDING MODE"...
  • Page 147 (4) to open the corresponding menu page. Any parameter change made is saved and remains in the memory also after a Battery-OFF. The riding parameters set by Ducati can be restored for each single riding mode through the DEFAULT Function.
  • Page 148 SETTING MENU>RIDING MODE>SPORT>ENGINE SETTING MENU>RIDING MODE>SPORT>DTC ON-01 ON-02 SPORT ENGINE SPORT ENGINE ON-03 TOURING MEDIUM TOURING ON-04 ON-05 URBAN HIGH URBAN ON-06 ON-07 ON-08 MEDIUM ON-05 DEFAULT EXIT DEFAULT EXIT SETTING MENU>RIDING MODE>SPORT>DTC ON-01 ON-02 SPORT ON-03 TOURING ON-04 ON-05 URBAN ON-06 ON-07...
  • Page 149: Customizing The Riding Mode: Engine Adjustment

    Customizing the Riding Mode: engine adjustment This function customises engine power associated SETTING MENU>RIDING MODE>SPORT>ENGINE with each riding mode. You enter the Setting Menu. Select "RIDING MODE" SPORT ENGINE option, by pressing button (1) or (2). MEDIUM TOURING Once function is highlighted, press button (4). Enter URBAN HIGH the "RIDING MODE"...
  • Page 150 When entering the function, currently set engine power is indicated on the right (above the word EXIT) (e.g.: MEDIUM). The central drop-down menu lists the available customisation options: MEDIUM HIGH Press buttons (1) and (2) to highlight the available power options one by one: in particular, use button (2) to highlight the following item and button (1) to highlight the previous item.
  • Page 151 SETTING MENU>RIDING MODE>SPORT>ENGINE SETTING MENU>RIDING MODE>SPORT>ENGINE SPORT ENGINE SPORT ENGINE MEDIUM TOURING TOURING MEDIUM URBAN HIGH URBAN HIGH MEDIUM MEDIUM EXIT EXIT MEMORY SETTING MENU>RIDING MODE>SPORT>ENGINE SETTING MENU>RIDING MODE>SPORT>ENGINE SPORT ENGINE SPORT ENGINE TOURING MEDIUM TOURING MEDIUM URBAN HIGH URBAN HIGH HIGH MEDIUM...
  • Page 152: Customizing The Riding Mode: Setting The Dtc Level

    Customizing the Riding Mode: setting the DTC level This function disables or sets DTC level for the SETTING MENU>RIDING MODE>SPORT>DTC selected riding mode. ON-01 You enter the Setting Menu. Select "RIDING MODE" ON-02 SPORT ENGINE ON-03 option, by pressing button (1) or (2). TOURING ON-04 ON-05...
  • Page 153 When entering the function, the currently set DTC level or status is indicated on the right (above the word EXIT) (e.g.: ON - 05, i.e. level 05). Customisation options are indicated on the central drop-down menu: levels 1 to 8 and status OFF. Once the desired new setting is highlighted, press button (4) to highlight MEMORY in orange.
  • Page 154 SETTING MENU>RIDING MODE>SPORT>DTC SETTING MENU>RIDING MODE>SPORT>DTC ON-01 ON-01 ON-02 SPORT ENGINE ON-02 SPORT ENGINE ON-03 ON-03 TOURING ON-04 TOURING ON-04 ON-05 ON-05 URBAN ON-06 URBAN ON-06 ON-07 ON-07 ON-08 ON-05 ON-08 ON-05 EXIT EXIT MEMORY SETTING MENU>RIDING MODE>SPORT>DTC SETTING MENU>RIDING MODE>SPORT>DTC ON-01 ON-01 ON-02...
  • Page 155: Customizing The Riding Mode: Abs Adjustment

    Customizing the Riding Mode: ABS SETTING MENU>RIDING MODE>SPORT>ABS adjustment ON - 01 This function disables or sets ABS level for the ON - 02 SPORT ENGINE ON - 03 selected riding mode. You enter the Setting Menu. TOURING Select "RIDING MODE" option, by pressing button (1) URBAN or (2).
  • Page 156 When entering the function, the currently set ABS Note level or status is indicated on the right (above the When you enable or disable the ABS through word EXIT) (e.g.: ON - 03, i.e. level 03). this function, i.e. toggling from disabled to enabled Customisation options are indicated on the central system or vice-versa, the procedure for activating or drop-down menu: levels 1 to 3 and status OFF.
  • Page 157 SETTING MENU>RIDING MODE>SPORT>ABS SETTING MENU>RIDING MODE>SPORT>ABS ON - 01 ON - 01 ON - 02 SPORT ENGINE ON - 02 SPORT ENGINE ON - 03 ON - 03 TOURING TOURING URBAN URBAN ON - 02 ON - 02 EXIT EXIT MEMORY SETTING MENU>RIDING MODE>SPORT>ABS SETTING MENU>RIDING MODE>SPORT>ABS...
  • Page 158: Customising Riding Mode: Restore Default Settings (default)

    Customising Riding Mode: restore default settings (DEFAULT) This function allows restoring the default values set SETTING MENU>RIDING MODE>SPORT>DEFAULT by Ducati for the parameters associated to a specific riding mode. SPORT ENGINE You enter the Setting Menu. Select "RIDING MODE" TOURING option, by pressing button (1) or (2).
  • Page 159 It will take three seconds to restore parameters, during which the display will show " WAIT... ". Once procedure is completed, "OK" will appear for two seconds to confirm that default parameters have been restored and the message EXIT will be highlighted.
  • Page 160: Customising The Riding Mode: Reset To Default Settings (all Default)

    Customising the Riding Mode: Reset to default settings (ALL DEFAULT) This function allows restoring the default values set by Ducati for all the parameters associated to all riding SETTING MENU>RIDING MODE modes. SPORT To gain access to this function, enter the Setting...
  • Page 161: Display Mode Setting

    SETTING MENU TRACK, FULL, CITY and CORE. RIDING MODE BACKLIGHT The default mode set by Ducati is CORE. INFO MODE DATE SET CLOCK SET It is possible to select a mode different from the set...
  • Page 162 Enter the INFO MODE menu. To select a layout, press button (1) or button (2). Once mode is highlighted, press button (4). The selected option is stored, current mode indication is refreshed and the EXIT option is automatically highlighted. Press button (4) to go back to previous display mode. By selecting DEFAULT, the display mode of all Riding modes becomes the CORE mode.
  • Page 163 SETTING MENU>INFO MODE SETTING MENU>INFO MODE DEFAULT DEFAULT >> CORE RIDING MODE RIDING MODE TRACK TRACK FULL FULL DEFAULT DEFAULT CITY EXIT CITY EXIT SETTING MENU>INFO MODE >> CORE DEFAULT RIDING MODE TRACK FULL CORE CITY EXIT Fig. 81...
  • Page 164: Light Mode Setting (drl)

    Light mode setting (DRL) This function, active only if the DRL is available, allows the user to choose the DRL status: AUTO or SETTING MENU MANUAL. You enter the Setting Menu. Select "DRL CONTROL" RIDING MODE BACKLIGHT INFO MODE DATE SET option, by pressing button (1) or (2).
  • Page 165 When entering the function on the left, the display will show the DRL settings: AUTO, MANUAL whereas on the right (above the word EXIT) the SETTING MENU>DRL CONTROL currently set mode. AUTO Press buttons (1) and (2) to highlight the available DRL MANUAL status: in particular, use button (2) to highlight the following item and button (1) to highlight the previous...
  • Page 166: Lap

    To open the LAP function menu, enter the Setting Menu. Select LAP option, by pressing button (1) or SETTING MENU (2). Once function is highlighted, press button (4). You open the LAP Menu. RIDING MODE BACKLIGHT INFO MODE DATE SET The menu allows you to: CLOCK SET OFF: disable the LAP function;...
  • Page 167 SETTING MENU>LAP LAP DATA SETTING MENU>LAP E R A S E O K EXIT LAP DATA E R A S E O K EXIT SETTING MENU>LAP LAP DATA E R A S E O K EXIT Fig. 85...
  • Page 168 Displaying the stored Laps Note The MAX stored speed is reached during lap To view the stored LAPs, you must enter the LAP (increased by 5%). menu. Select "LAP DATA" option, by pressing button (1) or Note (2). Once function is highlighted, press button (4). If the memory is empty, the display shows the When you enter the function, the following is lap timer reading "-.--.--", MAX RPM = ------ and MAX...
  • Page 169 SETTING MENU>LAP>LAP DATA TIME: 1’28’98 SPEED max: 238 KM/H LAP 01 RPM max: 9600 EXIT SETTING MENU>LAP>LAP DATA TIME: 1’19’90 SPEED max: 256 KM/H LAP 15 RPM max: 9950 EXIT SETTING MENU>LAP>LAP DATA TIME: 1’21’95 SPEED max: 248 KM/H LAP 02 RPM max: 9800 EXIT...
  • Page 170 Erasing stored Laps SETTING MENU>LAP To erase the stored LAPs, you must enter the LAP menu. LAPs can be erased from the LAP menu or from the LAP viewing page (LAP DATA). Select "ERASE ALL" option, by pressing button (1) or (2).
  • Page 171 Deletion is one single command that erases all stored laps. After deletion, the Laps 01 to 15 are displayed with all parameters showing an indefinite value "–" (time = SETTING MENU>LAP>LAP DATA -’ - -’’ - - , rpm = - - - - - , speed = - - - ). To exit the menu and go back to previous page, select TIME: -’--’--...
  • Page 172: Pin Code

    The motorcycle owner must activate (store) the PIN code; if there is already a stored PIN, contact an Authorised Ducati Dealer to have the function "reset". To perform this procedure, the Authorised Ducati Dealer may ask you to demonstrate that you are the...
  • Page 173 Activating the PIN CODE To activate the PIN CODE function and enter your own PIN CODE you must open the Setting Menu. SETTING MENU Select PIN CODE option, by pressing button (1) or (2). RIDING MODE BACKLIGHT Once function is highlighted, press button (4). INFO MODE DATE SET You open the PIN CODE menu.
  • Page 174 When entering the function, the display shows the message INSERT NEW PIN CODE followed by the first digit in green and three dashes "0 - - -". SETTING MENU>PIN CODE Entering the code: INSERT NEW PIN CODE 1) Press button (4), only one digit indicating "0" turns MEMORY green;...
  • Page 175 INSERT NEW PIN CODE very first PIN CODE is active and available again only MEMORIZED in case the PIN CODE function is reset (but this is only possible at a DUCATI Authorised Service Centre). EXIT SETTING MENU>PIN CODE INSERT NEW PIN CODE...
  • Page 176: Changing The Pin Code

    Changing the PIN CODE To change the existing PIN CODE and activate a new SETTING MENU>PIN CODE one, you must open the Setting Menu. Select "PIN CODE" option, by pressing button (1) or INSERT OLD PIN CODE (2). Once function is highlighted, press button (4). You open the "PIN CODE"...
  • Page 177 Repeat the procedures until you confirm all the 4 digits of the PIN CODE. When you press button (4) to confirm the fourth and last digit: if the PIN is not correct, the instrument panel displays WRONG for 3 seconds and then highlights the string of four dashes "- - - -"...
  • Page 178 SETTING MENU>PIN CODE SETTING MENU>PIN CODE INSERT OLD PIN CODE INSERT OLD PIN CODE WRONG CORRECT INSERT NEW PIN CODE INSERT NEW PIN CODE MEMORY MEMORY PIN CODE ALREADY PRESENT PIN CODE ALREADY PRESENT EXIT EXIT SETTING MENU>PIN CODE SETTING MENU>PIN CODE INSERT OLD PIN CODE INSERT OLD PIN CODE INSERT NEW PIN CODE...
  • Page 179 Entering the "new" code: 1) Press button (4), only one digit indicating "0" turns SETTING MENU>PIN CODE green; 2) Each time you press the button (2) the displayed INSERT OLD PIN CODE number increases by one (+ 1) up to "9" and then starts back from "0";...
  • Page 180 When you press button (4) to confirm the fourth and last digit, the instrument panel highlights the SETTING MENU>PIN CODE message MEMORY. INSERT OLD PIN CODE To save the new setting, hold button (4) for two seconds while the message MEMORY is highlighted INSERT NEW PIN CODE MEMORY in orange.
  • Page 181: Display Backlighting Setting

    Display backlighting setting This function allows selecting the instrument panel backlighting. SETTING MENU You enter the Setting Menu. Select "BACKLIGHT" option, by pressing button (1) or (2). Once function is RIDING MODE BACKLIGHT INFO MODE DATE SET highlighted, press button (4). CLOCK SET You open the "BACKLIGHT"...
  • Page 182 When entering the function, available backlighting options are indicated on the left: DAY, NIGHT, AUTO, SETTING MENU>BACKLIGHT while currently selected option is indicated on the right (above the word EXIT). AUTO Press buttons (1) and (2) to highlight the instrument panel backlighting options one by one: in particular, NIGHT use button (2) to highlight the following item and...
  • Page 183 Select DAY (day mode) to permanently set display "white" background for improved readability - recommended in conditions of strong ambient light. Select NIGHT (night mode) to permanently set display black background for dimmed visibility - recommended in case of poor ambient light and/or at night.
  • Page 184: Date Setting

    Date setting This function allows user to set or change the date. You enter the Setting MENU. SETTING MENU Select "DATE SET" option, by pressing button (1) or (2). RIDING MODE BACKLIGHT INFO MODE DATE SET Once function is highlighted, press button (4). CLOCK SET PIN CODE INFO SERTVICE...
  • Page 185 When entering the function, available settings are indicated on the left: YEAR, MONTH, DAY, while current date is indicated on the right (e.g.: SETTING MENU>DATE SET 2014/08/02). Year setting YEAR Select "YEAR" option, by pressing button (1) or (2). 2014 / 08 / 02 MONTH Once highlighted, press CONFIRM MENU button (4).
  • Page 186 Month setting Select "MONTH" option, by pressing button (1) or (2). Once option is highlighted, press button (4). SETTING MENU>DATE SET Month value starts flashing. Press button (1) to decrease month value by 1 unit: YEAR 12, 11, ... 01, 12. 2014 / 08 / 02 Press button (2) to increase month value by 1 unit: MONTH...
  • Page 187 Day setting Select "DAY" option, by pressing button (1) or (2). Once option is highlighted, press button (4). SETTING MENU>DATE SET Day value starts flashing. Press button (1) to decrease day value by 1 unit: 31, YEAR 30, ... 01, 31. 2014 / 08 / 02 Press button (2) to increase day value by 1 unit: 01, MONTH...
  • Page 188 Storing the date To store set/modified date, select MEMORY using SETTING MENU>DATE SET buttons (1) and (2) and press button (4) for 2 seconds. The instrument panel will display MEMORIZED for two seconds and then automatically highlight EXIT. YEAR 2014 / 08 / 02 MONTH EXIT MEMORY...
  • Page 189 If date is not correct, the instrument panel will display "WRONG DATE" flashing for three seconds and then will automatically highlight EXIT, while date is SETTING MENU>DATE SET indicated as "---- / -- / --" steady. It is still possible to set a new date.
  • Page 190: Clock Setting

    Clock setting This function allows user to set or adjust the time. You enter the Setting Menu. Select "CLOCK SET" SETTING MENU option, by pressing button (1) or (2). Once function is highlighted, press button (4). You RIDING MODE BACKLIGHT INFO MODE DATE SET open the "CLOCKSET"...
  • Page 191 When entering the function, available settings are indicated on the left: AM / PM, HOURS, MINUTES, while set time is indicated on the right (e.g.: AM 10 : SETTING MENU>CLOCK SET 30). To exit the menu and go back to previous page, select AM / PM EXIT and press button (4).
  • Page 192 Setting the hours Select "HOURS" option, by pressing button (1) or (2). Once option is highlighted, press button (4). Hour SETTING MENU>CLOCK SET value starts flashing. Press button (1) to decrease hour value by 1 unit: 12, AM / PM 11, ...
  • Page 193 Setting the minutes Select "MINUTES" option, by pressing button (1) or (2). SETTING MENU>CLOCK SET Once highlighted, press CONFIRM MENU button (4). Minute value starts flashing. AM / PM Press button (1) to decrease minute value by 1 unit: 10 : 25 59, 58, ...
  • Page 194: Service Information

    Service information This Function allows viewing information about the remaining time or mileage until the next Oil Service, SETTING MENU Desmo Service and Annual Service. RIDING MODE BACKLIGHT To view them, enter the Setting Menu, use button (1) INFO MODE DATE SET or (2) to select INFO SERVICE and press button (4).
  • Page 195: Setting The Units Of Measurement

    Setting the units of measurement This function allows you to change the units of measurement of the displayed values, regardless of SETTING MENU the Country configuration. To manually set the units of measurement, you must RIDING MODE BACKLIGHT INFO MODE DATE SET enter the Setting Menu.
  • Page 196 When entering the function, the display shows on the left the list of values for which units of measurements SETTING MENU>UNITS SETTING can be set: SPEED; SPEED Km/h TEMPERATURE; TEMPERATURE °C °F fuel consumption (CONSUMPTION); CONSUMPTION L/100 Km/L mpg Uk mpg USA reset to automatic settings (DEFAULT).
  • Page 197 Setting the units of measurement: Speed This function allows to change the units of SETTING MENU>UNITS SETTING measurement of speed (and hence even the ones of SPEED Km/h distance travelled). You open the "UNITS SETTING" menu, as described TEMPERATURE °C °F on the previous pages.
  • Page 198 The selected unit of measurement will be used by the instrument panel for the following indications: Motorcycle speed and Average speed (km/h or mph); Odometer, Trip1, Trip2 and Range (km or mi).
  • Page 199 Setting the units of measurement: Temperature SETTING MENU>UNITS SETTING This function allows you to change the units of SPEED Km/h measurement of the temperature. TEMPERATURE °C °F You open the "UNITS SETTING" menu, as described on the previous pages. CONSUMPTION L/100 Km/L mpg Uk mpg USA...
  • Page 200 The selected unit of measurement will be used by the instrument panel for the following indications: Engine coolant temperature and ambient air temperature.
  • Page 201 Setting the units of measurement: Fuel consumption SETTING MENU>UNITS SETTING This function allows you to change the units of SPEED Km/h measurement of the fuel consumption. TEMPERATURE °C °F You open the "UNITS SETTING" menu, as described on the previous pages. CONSUMPTION L/100 Km/L...
  • Page 202 The selected unit of measurement will be used by the instrument panel for the following indications: Instantaneous fuel consumption and Average fuel consumption.
  • Page 203 Setting the units of measurement: Reset to automatic settings SETTING MENU>UNITS SETTING This function allows you to restore the automatic SPEED Km/h TEMPERATURE °C °F settings for the units of measurement of all CONSUMPTION L/100 Km/L mpg Uk mpg USA indications displayed on the instrument panel.
  • Page 204: Bluetooth Device Setting

    Bluetooth device setting This function allows pairing and/or deleting any paired Bluetooth devices (XDiavel S). SETTING MENU To do this, you must enter the Setting Menu. RIDING MODE BACKLIGHT Select "BLUETOOTH" option, by pressing button (1) INFO MODE DATE SET or (2).
  • Page 205 (Smartphones and Earphones). passenger helmet (for further details please refer to the manual of the earphones coming with the Ducati kit part no. 981029498).
  • Page 206 If two or more Bluetooth devices have the same name, the list of the devices detected will include two The Ducati kit no. 981029498 can be purchased or more labels with the same name. separately at a Ducati Dealer or Authorised Service If one of the devices detected has no name, it is not Centre.
  • Page 207 SETTING MENU>BLUETOOTH SETTING MENU>BLUETOOTH PAIRING PAIRING ASSOCIATED DEVICES ASSOCIATED DEVICES PAIRING LOST AGV_CITYLIGHT AGV_CITYLIGHT PLEASE EXIT IPHONE_5S_MARK IPHONE_5S_MARK ARAI_SIGNET-Q ARAI_SIGNET-Q ARAI_SIGNET-R ARAI_SIGNET-R EXIT EXIT SETTING MENU>BLUETOOTH SETTING MENU>BLUETOOTH PAIRING PAIRING ASSOCIATED DEVICES ASSOCIATED DEVICES TOMTOM_BT_22 CONNECT AGV_CITYLIGHT AGV_CITYLIGHT GARMIN_NUVI_42 CONNECT IPHONE_5S_MARK IPHONE_5S_MARK GALAXY_S5_MIKE...
  • Page 208 It is possible to pair up to: SETTING MENU>BLUETOOTH 2 smartphones; PAIRING 1 navigator; ASSOCIATED DEVICES TOMTOM_BT_22 WAIT... 1 rider helmet; GARMIN_NUVI_42 GARMIN_NUVI_42 CONNECT 1 passenger helmet. AGV_CITYLIGHT GALAXY_S5_MIKE CONNECT IPHONE_5S_MARK NEXUS_5NIK CONNECT ARAI_SIGNET-Q If at least 5 devices have already been paired and the ARAI_SIGNET-R EXIT user attempts to run the Pairing, the following...
  • Page 209 When the device to be paired has been selected, the label in correspondence of that device replaces the word "CONNECTED" with "WAIT" and it is necessary to select the type of device to be paired. The display shows four icons that represent the available types. Types of devices can be: Smartphone;...
  • Page 210 SETTING MENU>BLUETOOTH SETTING MENU>BLUETOOTH PAIRING PAIRING ASSOCIATED DEVICES GARMIN_NUVI_42 ASSOCIATED DEVICES GARMIN_NUVI_42 WAIT... SELECT AGV_CITYLIGHT AGV_CITYLIGHT TOMTOM_BT_22 CONNECT IPHONE_5S_MARK IPHONE_5S_MARK GALAXY_S5_MIKE CONNECT ARAI_SIGNET-Q ARAI_SIGNET-Q NEXUS_5NIK CONNECT ARAI_SIGNET-R ARAI_SIGNET-R EXIT EXIT SETTING MENU>BLUETOOTH SETTING MENU>BLUETOOTH PAIRING PAIRING ASSOCIATED DEVICES GARMIN_NUVI_42 ASSOCIATED DEVICES GARMIN_NUVI_42 SELECT SELECT...
  • Page 211 Smartphone Note If user does not complete the pairing procedure To pair a Smartphone, the pairing procedure with the on the Navigator within 90 seconds, pairing screen on Bluetooth control unit requires user to enter a code instrument panel will go out, and display will go back (0000), which is only necessary the first time the to Bluetooth Setting Menu main screen.
  • Page 212 SETTING MENU>BLUETOOTH SETTING MENU>BLUETOOTH PAIRING PAIRING ASSOCIATED DEVICES GALAXY_S5_MIKE ASSOCIATED DEVICES SELECT AGV_CITYLIGHT GALAXY_S5_MIKE GARMIN_NUVI_42 AGV_CITYLIGHT INSERT PIN ON SMARTPHONE: 0000 ARAI_SIGNET-Q GARMIN_NUVI_42 ARAI_SIGNET-R ARAI_SIGNET-Q EXIT ARAI_SIGNET-R EXIT SETTING MENU>BLUETOOTH SETTING MENU>BLUETOOTH PAIRING PAIRING ASSOCIATED DEVICES GARMIN_NUVI_42 ASSOCIATED DEVICES SELECT AGV_CITYLIGHT GARMIN_NUVI_42 IPHONE_5S_MARK...
  • Page 213 Deleting associated devices From the Bluetooth setting menu it is possible to access the list of the paired devices on the left. From the list of paired devices, user can select the device to be deleted by pressing button (1) or button (2).
  • Page 214 SETTING MENU>BLUETOOTH SETTING MENU>BLUETOOTH PAIRING PAIRING ASSOCIATED DEVICES ASSOCIATED DEVICES GARMIN_NUVI_42 GARMIN_NUVI_42 AGV_CITYLIGHT AGV_CITYLIGHT IPHONE_5S_MARK IPHONE_5S_MARK ARAI_SIGNET-Q ARAI_SIGNET-Q ARAI_SIGNET-R ARAI_SIGNET-R EXIT EXIT SETTING MENU>BLUETOOTH SETTING MENU>BLUETOOTH PAIRING PAIRING ASSOCIATED DEVICES ASSOCIATED DEVICES GARMIN_NUVI_42 GARMIN_NUVI_42 AGV_CITYLIGHT IPHONE_5S_MARK IPHONE_5S_MARK ARAI_SIGNET-Q ARAI_SIGNET-Q ARAI_SIGNET-R ARAI_SIGNET-R EXIT EXIT...
  • Page 215: Information (info)

    Information (INFO) This function allows displaying several useful details. To view the "INFO", enter the Setting Menu, use SETTING MENU button (1) or (2) to select "INFO" and press button (4). RIDING MODE BACKLIGHT Available information: INFO MODE DATE SET CLOCK SET BATTERY (battery voltage);...
  • Page 216: Light Control

    Light control Low/high beam (version without DRL) At Key-On, the high beam and low beam lights are OFF: only the parking lights are turned on. Once the engine is started, the low beam is automatically turned on; it is possible to switch from low beam to high beam and vice versa by pressing button (3) in positions (A) and (B).
  • Page 217 Low/high beam (version with DRL) At Key-On, the high beam and low beam lights are OFF: only the parking lights and the DRL light are turned on. After starting the engine the high beam is automatically turned on if the AUTO mode is set and the instrument panel detects poor ambient light (NIGHT): if, on the other hand, the instrument panel detects good light conditions (DAY), the DRL light...
  • Page 218 High/low beam switching off during vehicle start (version without DRL light). To preserve the motorcycle battery, if when starting the engine the high/low beams are ON, the headlight is automatically switched off and then on again when the engine is started. High/low beam switching off during vehicle start (version with DRL lights).
  • Page 219 DRL (Daytime Running Light) — only for version with DRL lights Upon each Key-On, the DRL lights are turned on. It is possible to switch off the DRL lights by means of button (9) on the left-hand switch. By pressing button (9) again, the DRL lights are switched on again.
  • Page 220 Using the DRL light in AUTO (automatic) mode in case of poor light conditions, especially in case of fog or clouds, could impair safety: in this case DUCATI recommends to manually activate the low beam. DRL in MANUAL mode If the DRL light is in this mode, it does not change status when starting the engine.
  • Page 221 Turn indicators Turn indicators are automatically reset by the instrument panel. To activate the left turn indicators, press button (10) in position (I); to activate the right turn indicators, press button (10) in position (L). Turn indicators can be cancelled by pressing button (10) on LH switch.
  • Page 222 Hazard function The "Hazard" function turns all four turn indicators on at the same time to signal an emergency condition. Push button (11) to activate the "Hazard" function. It can only be activated when vehicle is turned on (Key- ON). When the "Hazard" function is active, all four turn indicators blink at the same time as well as warning lights on the instrument panel.
  • Page 223 Once the "Hazard" function is activated, if vehicle is turned off (key turned to "OFF"), the function stays active for 2 hours. After 2 hours, the turn indicators switch OFF automatically in order to save battery charge. Note When turning the vehicle key ON with "Hazard" function still active, the function remains active.
  • Page 224 Warning reading "Keep pressed to lock" (upon Key-Off) This warns that it is necessary to keep the button pressed to engage the steering lock. The steering lock can be turned on during the first 60 KEEP seconds after turning off the vehicle by pressing the PRESSED starter button.
  • Page 225 Warning reading "Steering locked" (upon Key- Off) This warns that the steering lock was activated after Key-Off. If the steering lock was activated correctly, the Instrument panel will display "STEERING LOCKED" STEERING indication for 5 seconds. LOCKED Fig. 132...
  • Page 226 Indication of No Key Detected (upon Key-Off) This function informs that it is not possible to engage the steering lock since the key is not detected. The display shows "NO KEY DETECTED". NO KEY DETECTED Fig. 133...
  • Page 227: Immobilizer System

    Immobilizer system To further improve the anti-theft protection, the motorcycle is equipped with an engine electronic block system (IMMOBILIZER) that is automatically activated every time the instrument panel is switched off. The grip of each ignition key contains an electronic device that modulates the output signal from a special antenna in the headlight fairing when the ignition is switched On.
  • Page 228: Keys

    Keys The Owner receives a set of keys comprising: 1 active key (1); 1 passive key (2). They contain the code used by the "Hands free" system for the Key-On, in different modes. The active key (1) is the one that is normally used and has a button (A) that, when pressed, makes the metal part exit (B).
  • Page 229 The active key contains a battery that must be replaced when the message "low level" is displayed under the key and battery symbols when the instrument panel is turned on. Note In this case, replace the battery as soon as possible.
  • Page 230 Warning Do not ride with the (active or passive) key inserted in the lock of the tank cap or in the seat lock as it could come out and represent a potential danger. Furthermore, if bumped, the key mechanism and the integrated circuit could be damaged.
  • Page 231: Replacing The Battery In The Active Key

    Replacing the battery in the active key Note The keys do not need to be reprogrammed after replacing the battery. Remove the metal part of the battery. Remove the rear plastic shell of the grip by pushing it forward and lifting it as shown in the figures. Fig.
  • Page 232 After separating the plastic shells, remove the battery protection cap (2). Remove battery (3) and install a new one. Fig. 139 Fig. 140...
  • Page 233 Install the battery in place, paying attention to respect polarity: positive pole (+) must be facing up. Important Only use the required type of battery. Refit protection cap (2) on the battery. Fig. 141 Fig. 142...
  • Page 234 Reinstall the rear plastic shell and push slightly as shown in the figure. Make sure shells close properly and that the key is well closed. Fig. 143 Fig. 144...
  • Page 235: Key Duplication

    The Ducati authorised service centre will program all new and old keys. The Ducati authorised service centre may ask to the customer to prove to be the motorcycle owner. The codes of the keys missing during the programming procedure will be erased to ensure that any lost key can not start the engine.
  • Page 236: Immobilizer Unlock Procedure

    Immobilizer unlock procedure In case of key acknowledgement system or key malfunction, the instrument panel allows the user to enter his/her own PIN code to temporarily restore motorcycle operation. If the PIN CODE function is active, the instrument panel shows the message "INSER PIN" and four zeros ("0") to enter the release PIN CODE.
  • Page 237 Entering the code: 1) Press button (4), only one digit indicating "0" is highlighted; 2) each time you press the button (2) the displayed number increases by one (+ 1) up to "9" and then 0000 starts back from "0"; INSER PIN 3) each time you press the button (1) the displayed number decreases by one (- 1) up to "1"...
  • Page 238 PIN CODE CORRECT for three seconds, and then displays the "standard screen". Fig. 146 Important If this procedure is necessary in order to start the motorcycle, contact an Authorised Ducati Service Centre as soon as possible to fix the problem. PIN CODE CORRECT Fig. 147...
  • Page 239: Controls

    Controls Position of motorcycle controls Warning This section shows the position and function of the controls used to ride the motorcycle. Be sure to read this information carefully before you use the controls. 1) Instrument panel on handlebar. 2) "Hands free" system. 3) Left-hand switch.
  • Page 240: Hands Free" System

    "Hands free" system The Hands free system consists of: 1) Hands free lock; 2) Antenna; 3) Active key; 4) Passive key; 5) Tank filler plug. Fig. 149...
  • Page 241 Hands free system "Key-On" and "Key-Off" Key-On consists in turning on the hands free system and all electronic devices. Key-Off consists in turning off the hands free system and all electronic devices, and ensures engine is turned off. Key-On is done using button (6) on the right switch on the handlebar or using the emergency button (7) on the Hands free lock.
  • Page 242 Key-On can only occur in the presence of one of the two keys (3) or (4) or using the pin code. Key-Off can also occur without any key (3) or (4). Key-Off occurs when motorcycle speed is equal to zero, by pressing button (6, Fig.
  • Page 243 The mechanical part (A) of the key (3) is used to open the fuel filler cap, the seat latch and bag locks. The metal part (A) of the key (3) remains hidden inside its housing, you can take it out by pressing button (B). Note With the vehicle in "Key-On"...
  • Page 244 Key-On/Key-Off using the button on the handlebar with the active key Key-On can be performed by pressing button (6) on the handlebar and with the presence of the active key (3, Fig. 154). Note The active key (3) has a range of approx. 1.5 m, therefore it must be located within this range to be detected by the system.
  • Page 245 Key-On/Key-Off using the button on the Hands free lock with the active key Key-On can be performed by pressing button (7) on the Hands free unit (1, Fig. 149) and with the presence of the active key (3, Fig. 154). Note The active key (3) has a range of approx.
  • Page 246 Key-On/Key-Off using the button on the handlebar with the passive key Key-On can be performed by pressing button (6) on the handlebar and with the presence of the passive key (4, Fig. 149). Note The passive key (4) has a range of a few cm, therefore it must be positioned close to the antenna (2).
  • Page 247 Key-On/Key-Off using the button on the Hands free lock with the passive key Key-On can be performed by pressing button (7) on the Hands free lock and with the presence of the passive key (4, Fig. 149). Note The passive key (4) has a range of a few cm, therefore it must be positioned close to the antenna (2).
  • Page 248 Key-On/Key-Off using the pin code (immobilizer override) Key-On can be performed by pressing button (7) on the hands free lock (1, Fig. 149) without the presence of the keys (3, Fig. 154) and (4, Fig. 149) and entering the pin code on the instrument panel. Key-Off can be performed by pressing button (6) on the handlebar, from Engine On position to Engine Off position.
  • Page 249 Entering PIN CODE function for overriding purposes This function allows the rider to "temporarily" turn on the motorcycle in case of HF (Hands Free) system "malfunction". If the motorcycle cannot be turned on using the normal starter button, press the "emergency" Hands Free button (7) to activate the function.
  • Page 250 The instrument panel shows INSER PIN and four zeros ("0") to allow entering the PIN CODE. Enter the code using the function buttons (8), (9) and (10) of the left-hand switch: 1) Press button (8), only one digit indicating "0" is 0000 highlighted;...
  • Page 251 PIN CODE CORRECT for three seconds, and then displays the "standard screen". Fig. 165 Important If this procedure is necessary in order to start the motorcycle, contact an Authorised Ducati Service Centre as soon as possible to fix the problem. PIN CODE CORRECT Fig. 166...
  • Page 252: Left-hand Switch

    Left-hand switch 1) Dip switch, two-position light selector switch: - pushed up (A): high beam ON ( ), back to its initial position (B): low beam ON ( - (C) pushed down: high-beam flasher ( - (FLASH), "Start-Stop lap" function. 2) 4 turn indicators (Hazard) on/off button.
  • Page 253 4) Menu navigation button. 5) Cruise Control button. 6) 3-position turn indicator switch ( - centre position = OFF; - position ( ) = left turn; 7) Turn indicators cancel button. 8) Button ( ) = warning horn. Fig. 168 Fig.
  • Page 254 Button (4) for menu navigation features three positions: - (D) for scrolling menu functions (UP); - (E) for scrolling menu functions (DOWN); - (F) for confirming menu functions. Button (5) for Cruise Control features three positions: - (G) Cruise Control on/off; - (H) increase cruise speed or resume previous speed;...
  • Page 255 A) Low beam. B) High beam. D) Menu UP E) Menu DOWN. F) Menu confirm. G) Cruise Off, On. H) Speed +. I) Speed set. 2) Hazard. 3) DRL (X Diavel S). 5) Cruise. 6) Turn indicator. ENTER 7) Turn indicator off. 8) Horn.
  • Page 256: Clutch Lever

    Clutch lever Lever (1) disengages the clutch. It features a dial adjuster (2) for lever distance from the twistgrip on handlebar. The lever distance can be adjusted through 10 clicks of the dial (2). Turn clockwise to increase lever distance from the twistgrip. Turn the adjuster counter clockwise to decrease lever distance.
  • Page 257: Right-hand Switch

    Right-hand switch 1) Red ENGINE OFF switch. 2) ENGINE START button. 3) System SWITCH-ON/OFF (key-on/key-off) and steering lock engagement. 4) LAUNCH CONTROL button (DPL). The switch (1) has two positions: A) pushed up: RUN ON. The engine can only be started in this position, pushing the button (2).
  • Page 258 2) Engine starting. 3) Electronic steering lock. 4) Launch Control (DPL). A) Run ON. B) Run OFF. C) Key-on. D) Key-off. Fig. 175...
  • Page 259: Throttle Twistgrip

    Throttle twistgrip The twistgrip (1) on the right handlebar opens the throttles. When released, it will spring back to the initial position (idling speed). Fig. 176...
  • Page 260: Front Brake Lever

    Front brake lever Pull in the lever (1) towards the twistgrip to operate the front brake. The system is hydraulically operated and you just need to pull the lever gently. The brake lever (1) has a dial (2) for adjusting the distance between lever and twistgrip on the handlebar.
  • Page 261: Rear Brake Pedal

    Rear brake pedal Press pedal (1) down with your foot to operate the rear brake. The control system is of the hydraulic type. Fig. 178...
  • Page 262: Gear Change Pedal

    Gear change pedal When released, the gear change pedal automatically returns to rest position N in the centre. This is indicated by the instrument panel N light coming on. The pedal can be moved: down = press down the pedal to engage the 1 gear and to shift down.
  • Page 263: Adjusting The Position Of The Gearchange Pedal And Rear Brake Pedal

    Adjusting the position of the gearchange pedal and rear brake pedal The position of the gearchange and rear brake pedals in relation to the footrests can be adjusted to suit the requirements of the rider. Adjust the pedals as follows: Gear change pedal Hold the linkage (1) and slacken the lock nuts (2) and (3).
  • Page 264 Rear brake pedal Loosen lock nut (4). Turn pedal stroke adjusting screw (5) until pedal is in the desired position. Tighten the lock nut (4). Operate the pedal by hand to check that there is 3 ÷ 6 mm of free play before the brake bites. If not, adjust the length of the master cylinder control rod as follows: Loosen lock nut (6) on master cylinder rod.
  • Page 265: Main Components And Devices

    Main components and devices Position on the vehicle 1) Tank filler plug. 2) Seat lock. 3) Side stand. 4) Rear-view mirrors. 5) Front fork adjusters. 6) Rear shock absorber adjusters. 7) Catalytic converter. 8) Exhaust silencer. Fig. 182...
  • Page 266: Tank Filler Plug

    Tank filler plug Opening Lift flap (1) and insert the active or passive key in the lock. Turn the key clockwise by 1/4 of a turn to release the lock. Lift the plug (2). Closing Close the plug (2) with the key inserted and push it down into its seat.
  • Page 267: Seat Lock

    Seat lock By working on the lock (1), it is possible to remove the rider seat, to reach the devices placed below it, as well as the passenger seat. Removing the seats Insert the active or passive key into the catch (1) and turn it clockwise until the rider seat latch disengages OPEN with an audible click.
  • Page 268 Remove the passenger seat (4) by sliding it from the motorcycle front side. Fig. 187...
  • Page 269 Refitting the seats Fit the passenger seat (4) by positioning it under belt (5) making it slide to the motorcycle's rear side, and insert tab (6) in the relevant seat (7). Fig. 188...
  • Page 270 Position the rider seat (2) by making it slide to the motorcycle's front side: make sure that tab (8) is under the subframe central plate (9), and tank pin (3) in tank slot (10). Slide the seat onwards until fully home and on the rear side insert pin (13) in hole (14) and the lateral pins (11) in the vibration damping pads (12) by pressing down until latch clicks in place.
  • Page 271: Side Stand

    Side stand Important Place the motorcycle on the side stand only when you are not going to use it for short periods of time. Before lowering the side stand, make sure that the bearing surface is hard and flat. Do not park on soft or pebbled ground or on asphalt melt by the sun heat and similar or the motorcycle may fall over.
  • Page 272 Warning Do not sit on the motorcycle when it is supported on the side stand. Note Check for proper operation of the stand mechanism (two springs, one into the other) and the safety sensor (2) at regular intervals. Note The engine can be started with the side stand down and the gearbox in neutral.
  • Page 273: Bluetooth Control Unit

    Ducati earphone kit no. 981029498 also allows sharing the music being played directly from rider helmet to passenger helmet (for further details please refer to the manual of the earphones coming with the Ducati kit part no. 981029498).
  • Page 274 Note The Ducati kit no. 981029498 can be purchased separately at a Ducati Dealer or Authorised Service Centre. Check that your Smartphone supports the following profiles: MAP profile: for a correct display of SMS and MMS notifications; PBAP profile: for a correct display of the...
  • Page 275: Front Fork Adjusters

    Front fork adjusters The front fork used on this motorcycle has rebound (return), compression and spring preload adjustment. It is possible to adjust the spring preload and compression on the left leg whereas the rebound can only be adjusted on the right leg. Adjustment is done by external screw adjusters: 1) for rebound adjustment;...
  • Page 276 The stiffest damping setting is obtained with the adjuster turned fully clockwise to the "0" position. By turning counter clockwise starting from this position, count the clicks that will correspond to positions "1", "2" etc. STANDARD settings are as follows: compression: 2 turns from max.
  • Page 277: Rear Shock Absorber Adjusters

    Rear shock absorber adjusters The rear shock absorber has adjusters that enable you to suit the setting to the load on the motorcycle. Adjuster (1), located on the swinging arm, adjusts the damping during the rebound phase (return). Turn adjuster (1) clockwise to stiffen the damping, or counter clockwise to soften it.
  • Page 278 Warning To turn the preload adjuster ring nut use a pin wrench. Pay attention to avoid hand injuries by hitting motorcycle parts in case the wrench tooth suddenly slips on the ring nut groove while moving it. Warning The shock absorber is filled with gas under pressure and may cause severe damage if taken apart by unskilled persons.
  • Page 279: Riding The Motorcycle

    Riding the motorcycle For all mechanical parts of the motorcycle to adapt to one another and above all not to adversely affect the life of basic engine parts, it is advisable to avoid harsh accelerations and not to run the engine at high rpm for too long, especially uphill.
  • Page 280 During the whole running-in period, the maintenance and service rules recommended in the Warranty Card should be observed carefully. Failure to follow these instructions releases Ducati Motor Holding S.p.A. from any liability whatsoever for any engine damage or shorter engine life.
  • Page 281: Pre-ride Checks

    Make sure lights, indicators and horn work and passenger. properly. In case of light malfunction, contact a Ducati Dealer or Authorised Service Centre. Before riding, perform a thorough check-up on your KEY LOCKS motorcycle as follows:...
  • Page 282 When the motorcycle speed exceeds 5 km/h, the warning light switches OFF to indicate the correct operation of the ABS system. Warning In case of malfunction, do not ride the motorcycle and contact a Ducati Dealer or authorised Service Centre.
  • Page 283 ABS device Check that the front (1) and rear (2) phonic wheels are clean. Warning Clogged reading slots would compromise system proper operation. It is recommended to disable ABS system in case of muddy road surface because under this condition the system might be subject to sudden failure.
  • Page 284: Engine Start/stop

    Engine start/stop Warning Before starting the engine, become familiar with the controls you will need to use when riding. Warning Never start or run the engine indoors. Exhaust gases are poisonous and may lead to loss of consciousness or even death within a short time. In the presence of the active or passive key, perform Fig.
  • Page 285 Warning The side stand must be fully up (in a horizontal position) as its safety sensor prevents engine starting when down. After Key-On, but with the engine not yet started, the system will perform a Key-Off automatically if the presence of the active key is not detected within 10 seconds.
  • Page 286 The red oil pressure warning light (4, Fig. 196) should go out a few seconds after the engine has started. The engine will shut off by turning the red button (1) on the handlebar to RUN OFF. To turn on the "Hands free"...
  • Page 287: Moving Off

    Moving off Warning 1) Squeeze the control lever to disengage the Avoid harsh acceleration, as this may lead to clutch. misfiring and transmission snatching. The clutch 2) Push down on gear change lever sharply with the lever should not be held in longer than necessary tip of your foot to engage the first gear.
  • Page 288: Braking

    Braking Slow down in time, shift down to use engine brake and then brake by operating both front and rear brakes. Pull the clutch before the motorcycle stops to avoid engine from suddenly stalling.
  • Page 289: Anti-lock Braking System (abs)

    Anti-Lock Braking System (ABS) Normally, the rider will perceive ABS operation as a harder feel or a pulsation of the brake lever and pedal. Using the brakes correctly under adverse conditions The front and rear brakes use separate control is the hardest – and yet the most critical - skill to systems.
  • Page 290 Warning Using the two brake controls separately reduces the motorcycle braking power. Never use the front brake control harshly or suddenly as you may cause rear wheel lift-up and lose control of the motorcycle (if the ABS is enabled). When riding in the rain or on slippery surfaces, braking will become less effective.
  • Page 291: Stopping The Motorcycle

    Stopping the motorcycle Reduce speed, shift down and release the throttle twistgrip. Shift down to engage first gear and then neutral. Apply the brakes and bring the motorcycle to a complete stop. Stop the engine by pushing the red switch (1) down. Press button (2) for Key-off.
  • Page 292: Parking

    In case of failed engagement of steering lock, contact engine is switched OFF; pay particular attention not a Ducati Authorised Service Centre. to touch the exhaust system with any body part and do not park the motorcycle next to inflammable...
  • Page 293 Warning Using padlocks or other locks designed to prevent motorcycle motion, such as brake disc locks, rear sprocket locks, and so on is dangerous and may impair motorcycle operation and affect the safety of rider and passenger.
  • Page 294: Refuelling

    Refuelling Never overfill the tank when refuelling. Fuel should never be touching the rim of filler recess. Warning Use fuel with low lead content and an original octane number of at least 95. Warning The motorcycle is only compatible with fuel having a maximum content of ethanol of 10% (E10).
  • Page 295: Tool Kit And Accessories

    3 mm Allen wrench; 5 mm Allen wrench. Fig. 202 6 mm Allen wrench. To access the compartment remove the seats. Have the following part, supplied as standard, installed by a Ducati Dealer or authorised Service Centre: passenger back kit.
  • Page 296: Main Use And Maintenance Operations

    Main use and maintenance operations Changing the air filter Important Have the air filter maintenance performed at a Ducati Dealer or Authorised Service Centre.
  • Page 297: Checking Coolant Level And Topping Up, If Necessary

    Checking coolant level and topping up, if necessary Check that the coolant level is between the MIN and MAX notches on the expansion reservoir side, on the motorcycle's left side. Top up if the level is below the MIN mark. Position the motorcycle in vertical position, perfectly flat.
  • Page 298: Check Clutch And Brake Fluid Level

    Brake and clutch fluid must be topped up and changed at the intervals specified in the scheduled maintenance table reported in the Warranty Booklet; Fig. 205 please contact a Ducati Dealer or authorised Service Centre. Important It is recommended all lines be changed every four years.
  • Page 299 Do not exceed the pedal and brake pads are still in good condition, specified level (3 mm above the minimum level). contact your Ducati Dealer or authorised Service Centre to have the system inspected and any air drained out of the circuit.
  • Page 300: Checking Brake Pads For Wear

    Friction material wear beyond this limit would lead to metal support contact with the brake disc thus compromising braking efficiency, disc integrity and rider safety. Fig. 207 Important Have the brake pads replaced at a Ducati Dealer or authorised Service Centre. Fig. 208...
  • Page 301: Charging The Battery

    Before charging the battery, it is best to remove it from the motorcycle. Important The battery is located under the cowling; to remove it, ALWAYS contact a Ducati Dealer or authorised Service Centre. Remove the right cowling (1) by loosening: the two screws (2) for side securing electrical components compartment;...
  • Page 302 Then, loosen two screws (5) and remove the battery support bracket (6). Slide out the battery (7) from its housing and, always starting from the negative terminal (-), loosen the two screws (8). Remove the positive cable (9), the ABS positive cable (10) from the positive terminal and the negative cable (11) from the negative terminal.
  • Page 303 Connect the battery charger leads to the battery terminals: the red one to the positive terminal (+), the black one to the negative terminal (-). Important Make sure the charger is OFF when you connect the battery to it, or you might get sparks at the battery terminals that could ignite the gases inside the cells.
  • Page 304 Refit the battery support bracket (6) by inserting the bracket end in the relevant seats (A) on the electric component support. Start and tighten the two screws (5) to a torque of 5 Nm ± 10%. Fig. 214...
  • Page 305 Reposition the right cowling (1) on the motorcycle by fixing it as explained below: start the two screws (2) for side securing electrical components compartment; start the three screws (3) for lower securing to the central cowling; start screw (4) securing central cowling to right cowling.
  • Page 306: Charging And Maintenance Of The Battery During Winter Storage

    Charging and maintenance of the battery during winter storage Your motorcycle is equipped with a connector (1) to which you can connect a special battery charger (2) (Battery maintainer kit part no. 69924601A - various countries; Battery maintainer kit part no. 69924601AX - for Japan, China and Australia only) available from our sales network.
  • Page 307 Note When the motorcycle is left unused (approximately for more than 30 days) we recommend owners to use the Ducati battery charge maintainer (Battery maintenance kit part no. 69924601A - various countries; Battery maintainer kit part no. 69924601AX - for Japan, China and Australia...
  • Page 308: Drive Belt Tension Check

    Drive belt tension check Important Have drive belt tension adjusted by a Ducati Dealer or authorised Service Centre. Fig. 219...
  • Page 309: Replacing The High And Low Beam Bulbs

    (HI) and parking lights (1). The light voltage and power values are indicated in paragraph "Electric System" page 336. Important Have the headlight lights replaced by a Ducati Dealer or an Authorised Service Centre. Fig. 220 Warning The headlight might fog up if the motorcycle is used under the rain or after washing.
  • Page 310: Aligning The Headlight

    Aligning the headlight Check correct headlight aiming. Position the motorcycle 10 metres from a wall or a screen, the motorcycle must be perfectly upright with the tires inflated to the correct pressure and with a rider seated, perfectly perpendicular to the longitudinal axis.
  • Page 311 To vertically align the low beam, turn the screws (1). To vertically align the high beam, turn the screw (2). Fig. 222...
  • Page 312: Adjusting The Rear-view Mirrors

    Adjusting the rear-view mirrors Manually adjust the rear-view mirror by pushing at points (A). Fig. 223...
  • Page 313: Tyres

    Check and set tyre pressure when tyres are cold. To avoid front wheel rim distortion, when riding Have the tyres replaced at a Ducati Dealer or on bumpy roads, increase tyre pressure by 0.2 ÷ 0.3 authorised Service Centre. Correct removal and bar.
  • Page 314 Minimum tread depth Measure tread depth (S, Fig. 224) at the point where tread is most worn down: it should not be less than 2 mm, and in any case not less than the legal limit. Important Visually inspect the tyres at regular intervals for detecting cracks and cuts, especially on the side walls, bulges or large spots that are indicative of internal damage.
  • Page 315: Check Engine Oil Level

    If the level is low, top up with engine oil. Ducati recommends you use Shell Advance 4T Ultra 15W-50 oil. As an alternative it is possible to use a motorcycle engine oil having the same degree SAE 15W-50 and meeting the following specifications JASO: MA2 and API: SM.
  • Page 316 Recommendations concerning oil It is recommended to use oil complying with the following specifications: viscosity grade SAE 15W-50; standard API: SM; standard JASO: MA2. SAE 15W-50 is an alphanumerical code identifying oil class based on viscosity: two figures with a W ("winter") in-between;...
  • Page 317: Cleaning And Replacing The Spark Plugs

    Spark plugs are essential to smooth engine running and should be checked at regular intervals. This operation allows checking the engine operating conditions. Have the spark plug checked and replaced by a Ducati Dealer or an authorised Service Centre. Fig. 226...
  • Page 318: Cleaning The Motorcycle

    Cleaning the motorcycle Important Do not wash your motorcycle right after use. When the motorcycle is still hot, water drops will Note evaporate faster and spot hot surfaces. To preserve the finish of metal parts and Never clean the motorcycle using hot or high- paintwork, wash and clean your motorcycle at regular pressure water jets.
  • Page 319 Warning Warning The headlight might fog up due to washing, rain To clean the side panniers, sue warm water, or moisture. Switch headlight on for a short time to neutral soap and a soft cloth. Soap and soft brushes help and dry up any condensate. are suitable to clean the zips;...
  • Page 320: Storing The Motorcycle

    Battery should be checked and charged (or replaced, as required) whenever the motorcycle has been left unridden for over a month. Protect the motorcycle with a suitable canvas. This will protect paintwork and let condensate breathe out. The canvas is available from Ducati Performance.
  • Page 321: Important Notes

    Britain, Switzerland, etc. have compulsory emission and noise standards that include mandatory inspections at regular intervals. Periodically carry out the required checks and renew parts as necessary, using Ducati original spare parts, in compliance with the regulations in the country concerned.
  • Page 322: Scheduled Maintenance Chart

    Scheduled maintenance chart Scheduled maintenance chart: operations to be carried out by the dealer List of operations and type of interven- Km. x1000 Time tion (months) mi. x1,000 0.6 [set mileage (km/mi) or time interval *] Reading of the error memory with DDS 2.0 and check of software version update on control units Check the presence of any technical updates and recall campaigns...
  • Page 323 List of operations and type of interven- Km. x1000 Time tion (months) mi. x1,000 0.6 [set mileage (km/mi) or time interval *] Check the proper tightening of brake calliper bolts and brake disc flange screws Check front and rear wheel nuts tightening Check frame-to-engine fasteners tightening Check wheel hub bearings Check and lubricate the rear wheel shaft...
  • Page 324 List of operations and type of interven- Km. x1000 Time tion (months) mi. x1,000 0.6 [set mileage (km/mi) or time interval *] Check rubbing points, clearance, freedom of movement and positioning of hoses and electric wiring in view Lubricate the levers at the handlebar and pedal controls Change coolant Visually check the coolant level and sealing of the circuit Check tyre pressure and wear...
  • Page 325 * Service operation to be carried out in accordance with the specified distance or time intervals (km, miles or months), whichever occurs first.
  • Page 326: Scheduled Maintenance Chart: Operations To Be Carried Out By The Customer

    Scheduled maintenance chart: operations to be carried out by the customer Km. x1000 List of operations and type of intervention [set mileage (km/mi) or time mi. x1,000 interval *] Months Check engine oil level Check brake fluid level Check tyre pressure and wear Check final drive belt tension Check brake pads.
  • Page 327: Technical Data

    Technical data Weights Overall weight (in running order with 90% of fuel - 93/93/EC): 247 Kg. Total weight (kerb weight without fuel): 237 Kg. Overall weight (dry conditions, without fluids and battery): 220 Kg. Maximum allowed weight (carrying full load): 440 kg. Warning Failure to observe weight limits could result in poor handling and impair the performance of your...
  • Page 328: Dimensions

    Dimensions 1010 mm 484 mm 335 mm 140 mm 1615 mm 2310 mm Fig. 227...
  • Page 329: Fuel, Lubricants And Other Fluids

    Fuel tank, including a reserve of 4 cu. dm Unleaded fuel with a minimum octane rat- 18 cu. dm (litres) ing of RON 95 Oil sump and filter Ducati recommends you use Shell Ad- 4.2 cu. dm (litres) vance 4T Ultra 15W-50 oil. As an alterna- tive it is possible to use a motorcycle en-...
  • Page 330 Warning The motorcycle is only compatible with fuel having a maximum content of ethanol of 10% (E10). Using fuel with ethanol content over 10% is forbidden. Using it could result in severe damage of the engine and motorcycle components. Using fuel with ethanol content over 10% will make the warranty null and void.
  • Page 331: Engine

    Engine Ducati Testastretta "L" twin-cylinder engine with DVT system ("Desmodromic Variable Timing"), 4 valves per cylinder, Dual Spark, liquid-cooled. Bore, mm: 106. Stroke, mm: 71.5. Total displacement, cu. cm: 1,262. Compression ratio: 13.1±0.5:1 Max crankshaft power (95/1/EC), kW/HP: 114.7 kW/156 HP at 9,500 rpm 73 kW/98 HP at 6,750 rpm (for the French market only).
  • Page 332: Timing System

    Timing system DESMODROMIC system with four valves per cylinder controlled by eight rocker arms (four opening and four closing ones) and two overhead camshafts with variable valve timing (DVT) both for the exhaust and intake side. This system is driven by the crankshaft through spur gears, pulleys and toothed belts.
  • Page 333: Performance Data

    Using fuel with ethanol content over 10% will make the Failure to follow these instructions releases warranty null and void. Ducati Motor Holding S.p.A. from any liability whatsoever for any engine damage or shorter engine Brakes life.
  • Page 334: Transmission

    Ducati Motor Holding Hydraulically-controlled slipper/progressive self- S.p.A. will be pleased to provide information about servo wet multiplate clutch. the special ratios available. Contact a Ducati Dealer or Drive is transmitted from engine to gearbox primary Authorised Service Centre. shaft via spur gears.
  • Page 335: Frame

    "Tubeless", radial tyre. Size: 120/70-ZR17 If the rear pulley needs replacing, contact a Make and type: Pirelli Diablo Rosso II. Ducati Dealer or authorised Service Centre. If improperly replaced, this component could Rear seriously endanger your safety, as well as the "Tubeless", radial tyre.
  • Page 336: Exhaust System

    engine. The whole system gives the motorcycle THRILLING BLACK excellent stability. Primer 2 K Black code 873.A002 (Palinal). Suspension travel: 59.5 mm. Primer, Black Stealth (Black 94) code 929.R223 Rear wheel travel: 120 mm. (Palinal). Clear coat code 923M1598 (Palinal). Exhaust system Mineral Grey frame code 37321 (INVER SPA).
  • Page 337: Electric System

    Electric system Refer to the table below to identify the circuits protected by the various fuses and their ratings. Basic electric items are: Headlight LED low beam light type: No. 4 LEDs (13.5V - 24.3W); LED high beam light type: No. 5 LEDs (13.5V - 18.9W);...
  • Page 338 The upper (A) and lower (B) fuse boxes are located on the right side of the electric component support, next to the battery. To reach the fuse boxes, remove the right cowling, see procedure described in page 300. To expose the fuses, lift the box protective cover. Mounting position and ampere capacity are marked on box cover.
  • Page 339 Upper fuse box key (A) Lower fuse box key (B) El. item Rat. +30 Black Box Sys- 10 A tem (BBS) KEY EMS / ABS / IMU +30 ABS UBMR 25 A KEY DSB / BBS 15 A +30 ABS UBVR 10 A KEY Lights KEY Accessories...
  • Page 340 The main fuse (C) is positioned on the solenoid starter. Remove the fuse cap to reach it. A blown fuse can be identified by breakage of the inner filament (F). Important Switch the ignition key to OFF before replacing the fuse to avoid possible short-circuits. Warning Never use a fuse with a rating other than specified.
  • Page 341 Injection/electric system diagram key LH heated handgrip connector (optional) RH heated handgrip connector (optional) Front stop light Exhaust valve motor Bluetooth Vehicle control unit (BBS) Left-hand switch Fuel level Right-hand switch Fuse box (2) Inertial sensor Fuse box (1) Immobilizer Hands free Rear speed sensor Hands Free Relay...
  • Page 342 Vertical cylinder main coil Headlight Horizontal cylinder secondary coil Horn Horizontal cylinder main coil Rear stop light Oil pressure sensor Wire colour coding Purge valve Oil temperature B Blue Clutch switch W White Side stand switch V Violet Engine temperature sensor Bk Black Air temperature sensor Y Yellow...
  • Page 343: Routine Maintenance Record Routine Maintenance Record

    Routine maintenance record Routine maintenance record NAME MILEAGE DATE DUCATI SERVICE 1000 15000 30000 45000 60000...
  • Page 346 XDiavel...

This manual is also suitable for:

Xdiavels

Comments to this Manuals

Symbols: 0
Latest comments: