Related Manuals for Pylontech RV12100
Summary of Contents for Pylontech RV12100
- Page 1 Rechargeable Li-ion Battery RV12100 User Manual Information Version: 1.0 20RVSV0801...
-
Page 3: Table Of Contents
This manual introduces RV12100 from Pylontech. Please read this manual before you to install the battery and follow the instruction carefully during the installation process. Any confusion, please contact Pylontech immediately for advice and clarification. Table of Contents Introduction Product features Product appearance Scope &... -
Page 4: Introduction
1. Introduction 1.1 Product Features The lithium iron phosphate battery adopts the modular series design, through the reliable BMS system and high-performance equalization technology, the whole system has the characteristics of flexible configuration and high reliability. Voltage platform: 12V; ... -
Page 5: Scope & Purpose Of Application
1.3 Scope & Purpose of Applications This battery is mainly used for RV, Caravan and similar recreational vehicle usage. It is designed to replace traditional lead acid battery types 12V battery applications also include Electric vehicles & marine use 2. Product Parameters 2.1 Battery Module Technical parameters Item Value... -
Page 6: Panel Definitions
2.2 Panel Definitions Battery switch: Press the Power Button for 1 second, the LEDs indicating health will light up and 1 second later the battery output will be active. Press the Power Button for 3 seconds to turn off the battery. Turning the battery back on is locked out for 3 seconds. - Page 7 Please refer to the table below for normal display state： Status Remark State ●★ Run ●★ ALM SOC4 SOC3 SOC2 SOC1 Turn off All off 0% 25% ● 26%-50% ● ● All SOC Light is Idle ● solid 51%-75% ● ●...
-
Page 8: System Wiring
Indicator light description: ●： Green light solid Green light flashing (2S flashing) ★： ●： Red light solid Red light flashing (2S flashing) ★： 2.3 System Wiring 2.3.1. Parallel Connection: Before wiring the battery model, make sure all batteries are turned off. Follow the steps shown below for wiring, with all positive poles together and all negative poles together. - Page 9 Please Note: 1. The number of Parallel connections is limited to 8 pieces 2. Ensure that the voltage difference between the batteries should not exceed 0.2V before connection. If batteries do exceed 0.2V difference then all batteries will require a full charge so they are an equal voltage. 3.
-
Page 10: Installation Environment
3. Installation Environment Battery operating environment requirements are as follows: Working temperature: 0℃ - 50℃ Humidity: 5% - 95% Altitude: ＜4000m The site environment: Away from heat, no corrosive gas, no explosive gas, no damaging gas, no damaging insulation Conductive dust 4. - Page 11 Pylon Technologies Co., Ltd. No. 73, Lane 887, ZuChongzhi Road, Zhangjiang Hi-Tech Park Pudong, Shanghai 201203, China T+86-21-51317699 | +86-21-51317698 service@pylontech.com.cn www.pylontech.com.cn...