Table of Contents
Advertisement
Culligan knows the more informed you are about your water treatment systems, the more confident you will be
about its performance. It's because of this and more than seventy years of commitment to customer satisfaction that
Culligan is providing this Performance Data Sheet to its customers.
Important Notice: Read this Performance Data Sheet and compare the capabilities of this unit with your actual
water treatment needs. It is recommended that before purchasing a water treatment unit, you have your water
supply tested to determine your actual water treatment needs.
Manufacturer:
Culligan International Company
9399 W. Higgins Rd., Suite 1100, Rosemont, IL 60018 USA
(847) 430-2800
Product:
Culligan Smart Sensor Arsenic Reduction Water Conditioner 10"
Testing Conditions & Results:
Capacity:
75,000 gal (289,500 L)
Pressure:
60 psi
Temperature:
63°- 73° (17° - 23°C)
Service Flow:
5.0 gpm @ 6.0 psi, 19.3 Lpm @ 6.0 psi
Operating Conditions:
Operating Temperature Range:
Water Pressure Range:
Water Pressure Range (Canada):
Electrical Characteristics:
Substance Reduction
Testing was performed under standard laboratory conditions, actual performance may vary
Model
Substance
Trivalent Arsenic pH 6.5
Smart
Filter
Trivalent Arsenic pH 8.5
Arseinc
Pentavalent Arsenic pH 6.5
Reduction
10"
Pentavalent Arsenic pH 8.5
The Culligan Smart Filter Arsenic Reduction Water Conditioner 10" has been tested and certified by WQA
against NSF/ANSI Standard 53 for the reduction of arsenic (pentavalent and trivalent) up to 75,000 gallons. The
concentration in water entering the system was reduced to a concentration less than or equal to the permissible limit
for water leaving the system, as specified in NSF/ANSI 53.
Performance Indicator: If water flow decreases or a notable taste change occurs, the filter should be backwashed.
If conditions do not improve, contact your local Culligan Man. He can determine if your filter requires servicing.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before
or after the system. Refer to the specifications and warranty sections of this owners guide for more specific product
information.
To avoid contamination from improper handling and installation, your system should only be installed and serviced
by your Culligan Man. Performance will vary based on local water conditions. The substances reduced by this
product are not necessarily in your water.
This system has been tested for the treatment of water containing pentavalent and trivalent arsenic at concentrations
of 0.050 mg/L or less. This system reduces both pentavalent arsenic (also known as As(V), As(+5) and arsenate)
and trivalent arsenic (also known as As(III), As(+3) and arsenite) below the EPA MCL. Please see Arsenic Facts
section of the Performance Data Sheet for explanation of reduction performance.
The arsenic removal component of this system must be replaced at the end of its useful life of 75,000 gallons for the
Culligan Smart Filter Arsenic Reduction Water Conditioner 10". The replacement of the removal component can be
purchased from your local Culligan dealer.
Buyer Signature
Seller Signature
33 - 120°F (1 - 50°C)
20 - 120 psi (140 - 830 kPA)
20 - 90 psi (140 - 620 kPA)
24V/50-60 Hz, 45 Watts
Maximum
Influent
Permissible
Challenge
Product water
Concentration
Concentration
mg/L
mg/L
0.050 + 10%
0.010
0.050 + 10%
0.010
0.050 + 10%
0.010
0.050 + 10%
0.010
Reduction
Minimum
Average
Requirements
Reduction
Reduction
94.6%
95.6%
95.0%
97.3%
Date
Date
Performance
Data Sheet
Culligan Smart
Sensor Arsenic
Reduction Water
Conditioner 10"
96.0%
96.4%
97.6%
97.8%
21
Advertisement
Table of Contents
