Set Time & Date - Culligan Smart Filter Arsenic Reduction Water Conditioner Owner's Manual

Set Date and
TIme
12
Set Date and TIme
To update the date or time and be updated at the control valve or remote display. Follow the
procedure below to update the date or time.
Filtering
JAN
-01-09 12:01 A
1) information
2) manual mode
3) set date/time
4) Accessories
1) information
> 2) manual mode
3) set date/time
4) Accessories
2. Set Month
Set Month
Jan
• If the default selection is correct, pressing
the next question.
• If the value displayed is NOT correct then pressing the
change the display, as shown to show a ">" symbol next to the displayed value.
Set Month
> FEB
• Once the desired value is displayed, this value can be accepted by pressing the
ChECk mARk
"
doWN
Pressing the
dOWN
Press arrow
ChECk mARk
Press the
to show a ">" symbol next to the displayed value.
doWN
Pressing the
display to read "Set Month".
the
doWN arrow will accept that value and take you to
• The ">" symbol indicates that this value may be changed
by pressing the
example, pressing the
is displayed changes the display from "JAN" to "FEB".
" button.
arrow will accept that value and take you to the next question.
button will change the display
arrow button will change the
ChECk mARk
button will
uP doWN
and arrow buttons. For
doWN
arrow while the ">" mark