Performance Data Sheet - Culligan Platinum Series 9" Owner's Manual

Performance Data Sheet

Culligan knows the more informed you are about your water treatment systems, the more confident you
will be about its performance. It's because of this and more than sixty years of commitment to customer
satisfaction that Culligan is providing this Performance Data Sheet to its customers.
IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with
your actual water treatment needs. It is recommended that before purchasing a water treatment unit, you
have your water supply tested to determine your actual water treatment needs.
MANUFACTURER:
Culligan International Company,
One Culligan Parkway, Northbrook, IL 60062-6209 USA
(847) 205-6000
PRODUCT: Culligan Platinum Series
TESTING CONDITIONS & RESULTS:
Flow Rate: 9 gpm
Pressure: 30 - 40 psi
Acidity: Non-Corrosive
Temperature: 68° (20°C)
pH: 7.6
SOFTENER SPECIFICATIONS:
Maximum Flow Rate: 14 gpm (52 Lpm)
Pressure Drop at Maximum Flow Rate: 15 psi (102 kPa)
Operating Temperature Range: 33 - 125° F (1 - 50°C)
Maximum Drain Flow Rate: 2.0 gpm (8 Lpm)
Working Pressure Range: 20 - 120 psi (140 - 860 kPa)
The Culligan Platinum Series water softeners with Aqua-Sensor sensing device are tested and
certified under ANSI/NSF Standard 44 for softener performance.
Refer to the Specifications, Familiarization and Warranty section of this Owner's Guide for more specific
product information. To avoid contamination from improper handling and installation, your system
should only be installed and serviced by your Culligan Man. Performance will vary based on local water
conditions. The substances reduced by this system are not necessarily in your water.
Culligan water softeners are designed to work with any salt of good quality, although it is recommended
that you ask your local Culligan Man for his suggestion on the best type and grade of salt to use in this
softener. For replacement components, please contact your local Culligan dealer or 847-205-6000 for the
dealer nearest you.
NOTICE: This softener is not intended to be used with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the system.
9" Water Softener with Aqua-Sensor
™
Capacity: 15,700 grains @ 4.0 lb. salt
22,000 grains @ 8.0 lb. salt
24,000 grains @ 12.0 lb. salt
Sensing Device
®
13