Remote Control Command Description - Prodigit 3350F Series Operation Manual

84 PRODIGIT

4-6. Remote control command description

4.6.1. PRESET Set and Read the Default of Load
RISE
Syntax ： [ PRESet：] RISE {SP}{NR2}{；NL}
Purpose： Set and read the RISE SLEW-RATE
Description：
1. The definition of RISE SLEW-RATE is load level change or dynamic load can be
2. The value of RISE has to be included the number of the decimal point, otherwise
3. The least significant number is the 3th behind the decimal point.
4.3350F will set to the maximum value of the model automatically when the set
5. The unit is (m)A/uS.
FALL
Syntax ： [ PRESet：] FALL {SP}{；NL}
Purpose： Set and read the FALL SLEW-RATE
Description：
1. The definition of FALL SLEW-RATE is load level change or dynamic load can be
2.3350F will set to the maximum value of the model automatically when the FALL
3. The unit is (m)A/uS .
PERI or PERD
Syntax ： [ PRESet：] PERIPERD：HIGHLOW{SP}{ NR2}{；NL}
Purpose：Set and read the TLOW and Thigh of DYNAMIC when loading
Description：
1. A period of loading waveform of DYNAMIC is combined by TLOW and THIGH.
2. The value of TLOW and THIGH have to be included the number of the decimal
3. The least significant number is the 5th behind the decimal point.
4. 3350F will set the value of TLOW or THIGH automatically when the value which
5. The unit is mS.
LDONv
Syntax： [ PRESet：] LDONv {SP}{NR2}{；NL}
Purpose：Set and Read the voltage of LOAD ON
Description：This command is for setting the Load voltage value of LOAD ON.
[ PRESet：] RISE ？ {；NL}
programmed of RISE and FALL are completely independent.
the command will not be available.
RISE is over the specification of Load.
[ PRESet：] FALL？{；NL}
programmed of RISE and FALL are completely independent.
which has been set is over the specification of Load.
[ PRESet：] PERIPERD：HIGHLOW？{；NL}
Point, otherwise the command will not be available.
Has been set is over the maximum of the Load.
[ PRESet：] LDONv？{；NL}