Cleaning; Ower U P; Input Terminal On The Rear Panel; Repair - Prodigit 3350F Series Operation Manual

2-9. Cleaning

To clean this product, use a soft or wet cloth.
・ Before you clean this product, power this product off and disconnect the power plug.
・ Please do NOT use any organic solvent capable of changing the nature of the plastic
such as benzene or acetone.
・ Please pay attention that any liquid should not be penetrated into this product.
2-10. Power Up
Operation check
2.10.1. Turn off (O) the POWER switch
2.10.2. Check that the power cord is corrected.
2.10.3. Check that nothing is connected to the DC INPUT (load input terminal) on the
2-11. Connection to the load Input Terminal on the Rear Panel
Connection procedure of the load input terminal on the rear panel
2.11.1. Turn off POWER switch.
2.11.2. Check that the output of the equipment under test is off.
2.11.3. Connect the load wire to the load input terminal on the rear panel.
2.11.4. Check the polarity of the connection and connect the load wire to the output
Terminal of the equipment under test.

2-12. Repair

If the instrument is damaged, please attach a tag to the instrument to identify the owner and
indicated they require service or repairing. And inform the prodigit sales and service office or
representative.
2-13. GPIB connection Option
The GPIB connector is on the rear panel which to connect the 3350F mainframe to the
controller and other GPIB devices. An GPIB system can be connected in any configuration
(star, linear, or both ) as long as
Front and rear panels.
3350F Series Operation Manual 15