Table 4-4B Stage Command Summary; Table 4-5B System Command Summary - Prodigit 3350F Series Operation Manual

STAGE COMMAND
[STATe：] LOAD {SP}{ON│OFF} {；│NL}
[STATe：] LOAD {?} {；│NL}
[STATe：] MODE {SP} {CC│CR│CV│CP} {；NL}
[STATe：] MODE {?} {；│NL}
[STATe：] SHORt {SP} {ON│OFF} {；│NL}
[STATe：] SHORt {?} {；│NL}
[STATe：] PRESet {SP} {ON│OFF} {；│NL}
[STATe：] PRESet {?} {；│NL}
[STATe：] SENSe {SP} {ON│OFF│AUTO } {；│NL}
[STATe：] SENSe {?} {；│NL}
[STATe：] LEVEl {SP} { LOW│HIGH} {；│NL}
[STATe：] LEVEl {?} {；│NL}
[STATe：] LEV{SP} {LOW │HIGH} {；│NL}
[STATe：] LEV{?} {；│NL}
[STATe：] DYNamic {SP} {ON│OFF} {；│NL}
[STATe：] DYNamic {?} {；│NL}
[STATe：] CLR{；│NL}
[STATe：] ERRor {?}{；│NL}
[STATe：] NO {SP}GOOD {?}{；│NL}
[STATe：] NG {?}{；│NL}
[STATe：] PROTect {?}{；│NL}
[STATe：] CCR{SP}{AUTO│R2}{；│NL}（Note1）
[STATe：] NGENABLE{SP}{ON│OFF}{；│NL}
[STATe：]POLAR{SP}{POS│NEG}{；│NL}
[STATe：]START{；│NL}
[STATe：]STOP{；│NL}
[STATe：]TESTING {?}{；│NL}
SYSTEM COMMAND: available for all module
[SYStem：] RECall {SP} {m [,n] }{；NL}
[SYStem：] STORe {SP} {m [,n] }{；NL}
[SYStem：] REMOTE {；NL}
[SYStem：] LOCAL{； NL}
[SYStem：] NAME {?} {； NL}

Table 4-4B STAGE COMMAND SUMMARY

COMMAND

Table 4-5B SYSTEM COMMAND SUMMARY

3350F Series Operation Manual 81
REMARK
0：OFF 1：ON
0|1|2|3：CC|CR|CV|CP
0：OFF 1：ON
0：OFF 1：ON
0：OFF/AUTO 1：ON
0：LOW 1：HIGH
0：LOW 1：HIGH
0：OFF 1：ON
0：GO 1：NG
0：GO 1：NG
0：TEST END，1：TESTING
NOTE
m=1~10 n=1~15
m=1~10 n=1~15
RS232/USB/LAN
command
RS232/USB/LAN
command
RETURN
"XXXXX"