The Description Of Abbreviation; Remote Control Command Language Description; Table 4-8 Gpib Command Terminator - Prodigit 3350F Series Operation Manual

4-4. The description of abbreviation

SP：Space, the ASCII code is 20 Hexadecimal.
；：Semicolon, Program line terminator, the ASCII code is OA Hexadecimal.
NL：New line, Program line terminator, the ASCII code is OA Hexadecimal.
NR2：Digits with decimal point. It can be accepted in the range and format of###.#####.
For Example：
30.12345, 5.0
The description of GPIB programming command syntax.

4-5. Remote Control Command Language description

{ } ： The contents of the { } symbol must be used as a part or data of the GPIB
[ ] ： The contents of the [ ] symbol indicts the command can be used or not. It depends
| This symbol means option. For example〝LOW|HIGH〞means it can only use
：
Terminator
：
Semicolon〝；〞： The semicolon〝；〞is a back-up command, the semicolon allows you to
command, it can not be omitted.
on the testing application.
LOW or HIGH as the command, it can choose only one as the setting
command.
You have to send the program line terminator character after send the GPIB
command, the available command terminator characters which can be
accepted in 3350F mainframe is listed in Table 4-9.
LF WITH EOI
CR，LF WITH EOI

Table 4-8 GPIB COMMAND TERMINATOR

combine command statement on one line to create command message.
LF
CR，LF
3350F Series Operation Manual 83