Operating Instructions - Prodigit 3350F Series Operation Manual

3-5. Operating Instructions

3.5.1. Setting System Parameters
The system button allows the setting of:
a. GPIB address
b. RS232 BAUD RATE
c. Buzzer ON/OFF
3.5.1.1. To set the GPIB address you must press the system key once. The LCD will
3.5.1.2. To set the RS232 baud rate you must press the system key twice. The LCD
Display the current address. The arrow keys are used to change the address.
Once the required address is reached press enter or store button to save the
New address. The exit key can be pressed to return to the normal screen.
will Display the current baud rate. The upper arrow keys are used to change
the baud rate. Once the required value is reached press enter or store button
to save the new setting. The exit key can be pressed to return to the normal
screen.
3350F Series Operation Manual 57