Prodigit 3350F Series Operation Manual page 43

34 PRODIGIT
Setting Upper limit power WH, Middle 5 digit LCD display「W-Hi」right 5 digit LCD
Display the unit is "W", The W-Hi set range from 0.0 W to 1800.0W step 0.1W by
Rotating the Setting knob.
Setting lower limit power WL, Middle 5 digit LCD display「W-Lo」lower 5 digit LCD
Display the unit is "W", The W-Lo set range from 0.0 W to 1800.0W step 0.1W by
Rotating the Setting knob.
Setting NG ON/OFF, When exceed
Whether NG on LCD display.
Load Current
CC mode, press limits key to set the V-Hi and V-Lo voltage upper and lower
Limits of the GO / NG.
Current
NG
Low
VH、VL、IH、IL、WH、WL One of these
Go
NG
High
Voltage