Table of Contents
Advertisement
Power failure
Filter cartridge stuck by dirt or
Filter pump
other objects
does not work
Low water level
Spa tub in an
Extra air pressure by strong
Abnormal
sunshine
Shape
Air valve got loosen
Spa loses air
Hole or split on the spa tub
Insufficient filtering time
Water not
Dirty filter cartridge
clean
Improper water maintenance
Check the power supply
Clean or replace filter cartridge
Add more water to reach the minimum
water line
Please check the air pressure and release
air if necessary
During hot weather, it recommended to
check if it is necessary to release some air
to avoid any possible damage to the spa
pool
Inflate the spa till Yellow section of the
manometer is pushed out. Make sure the
valve is screwed tightly. Replace the valve
if necessary.
Put soap water in a squirt bottle and spray
on seams. If there is a leak, small bubbles
will come out. After you find the leak,
clean and dry the leaking area, then use
the repair patch comes with your spa to
repair. Check the repair section on P19
Extend filtration time
Clean or replace the filter cartridge in time
Refer to the chemical manufacture's
instruction
Advertisement
Table of Contents
