Kogan KASPAMSDLTA User Manual page 12

Note:
Check before inflation whether the manometer cap is screwed up tight on the valve of
pool body. If not, please tighten and then inflate. After inflation, the manometer cannot
be removed, otherwise air will be released.
When the Yellow section is pushed out, the spa inflation is completed. You can now fill the
spa with water.
After water filling is completed, check air pressure once again to ensure the manometer
reaches Green section. Always ensure the manometer is on Green section at use.
If the White section of the manometer appears, the spa is over inflated. Rotate the valve
cap counter-clockwise, have the air released till the Green section is pushed out, then
tighten it clockwise.
To avoid over inflation caused by warm weather or sunshine when leaving spa for weeks
inflated and filled with water in temperature higher than 20°C, please release some air to
make sure the manometer is always on Yellow section.
Note: Deflation Instructions
•
Unscrew the manometer cap on the spa pool to deflate the spa.
•
Once the deflation is completed, replace the cap back.
Yellow
Green
White