Table of Contents
Advertisement
PRCD Testing
WARNING:
the end of the power cord. The PRCD must be tested before each use. Do not use the
spa if the PRCD does not function properly. Disconnect the power cord until the fault
has been identified and corrected. Contact a licensed electrician to correct the fault.
There are no serviceable parts inside the PRCD. Opening the PRCD will void the
warranty.
1.
Plug the machine into a power outlet. Note that PRCD doesn't work on faulty
sockets or plug boards.
2.
Press the RESET button on the PRCD. The indicator turns red.
3.
Press the TEST button on the PRCD. The red colour shown on the indicator should
disappear. Otherwise the PRCD is faulty. Do not use the spa if the spa is faulty.
Contact a qualified electrician to correct the fault.
4.
Press the RESET button on the PRCD again. The indicator should turn red. If yes,
the spa is ready for use.
Spa Control Unit Connected External Equipotential Bonding Conductors
A qualified electrician shall wire the spa control unit to the household equipotential terminal
using a minimum 1.5mm2 solid copper conductor.
Risk of electric shock: This product is provided with a PRCD located at
indicator
Reset
c
Advertisement
Table of Contents
