Kogan KASPAMSDLTA User Manual page 15

Controller Operation
Heater Button
Bubble Button
Up Button
Temperature display: press RESET on PRCD, read the current
temperature on the screen.
Heater Button: Press HEATER button to start or stop heating.
The filter will automatically be running for 15 seconds to test the
working condition once the HEATER function is started. If there is
no abnormality, the heater will keep working until the water
temperature reaches the set value. After the water temp is lower
than the set temp, the heater will restart to heat the water
automatically. The HEATER button displaying red means that
the heating system is activated. The HEATER button displaying
green means that the system is at rest and keeping the water in
set temp.
Filter Button: Press FILTER button to turn the function on/off.
The light of FILTER button displays green when activated.
NOTE: Filtration cannot be turned off when heating function is
on (whether the heater is running or at rest). When the Heating
function is turned off, Filtration will be stopped after 30 seconds.
Filtration function can be then activated separately.
NOTE: Auto-filtration system automatically activated every 4
hours.
Filter Button
Timer Button
Down Button