Table of Contents
Advertisement
Water Treatment:
•
Always follow the chemical manufacturer's direction and the health and hazard
warning.
•
Never mix chemicals together. Add the chemicals to the spa water separately.
Thoroughly dissolve each chemical before adding one to the water.
•
Please note that chlorine and bromine products should never be mixed. This is
extremely dangerous. If you usually use chlorine-based products and you want to
switch to bromine-based products or vice versa, it is mandatory to completely
change the spa water before any product changes.
•
Do not add chemicals if the spa is occupied. This can cause skin or eye irritation.
•
Do not over use the chemicals or use concentrated Chlorine. This can damage the
spa tub and cause potential hazard to your skin. Improper chemical use will void
the warranty.
Maintenance of Spa Water and Cartridge
Protect all the spa occupants from possible water related illness by keeping the spa water
clean and sanitized. Always practice good hygiene. Ensure proper spa water quality by
following these procedures:
1.1
Install clean filter cartridge to water inlet.
•
First install the cartridge base to the inlet by rotating it clockwise.
•
Then install the filter cartridge to the base. Push and fix it. It should always stay in
place when the spa is filled with water.
1.2 Inspect and clean the filter cartridge after each use. Change the filter cartridge after it
works continuously for 150 hours or after seeing cleaning reminder.
•
Pull out the filter cartridge from the base.
•
Use a garden hose to rinse off the cartridge.
•
Reinstall the clean or spare cartridge back onto the spa tub wall.
Note:
Do not throw away the cartridge base when replacing the filter cartridge. Only change
the base when it gets loose after long term using.
Advertisement
Table of Contents
