Loading Stored Patient Data - Maico MB 11 Classic Operation Manual

Operation Manual MB 11 Classic

5.7 Loading stored patient data

Figure 9
Load from database
After clicking on the button "Search", all stored patients will be shown (see
Figure 9).
Select a patient by double-clicking on the name with the mouse or highlight
the desired name and select the OK button.
If a test result already exists for this
patient, the button "Show
Measurements" on the right of the
screen (see Figure 10) becomes
active. By clicking on this button
you can view a list of all tests
performed on this patient and
review each test result.
Figure 10
MB 11 - program with loaded patient data and active
"Show Measurement" button
8100498-4_OM_MB11_Classic_3.18_EN_16a.docx 31 01/16