Maico MB 11 Classic Operation Manual page 27

Operation Manual MB 11 Classic
information as well as screener, physician, screening location and birth
hospital entries entered in the List Field Setup area.
"Print Mode" – This allows the type of printout to be selected.
Enable "Label" to print to a supported label printer. In this mode, the "best"
result for both ears will print out by default even if it is not the most current
one performed. If there is no Pass result for one or both ears, then the most
current Refer and then Aborted test will print. Use the "Selected Data
Printout" setting to override this default printing scheme and choose your
desired screening tests for printing to the label printer.
Enable "Selected Data Printout" to choose from a list of results for the
current patient and print these results. These results can be printed to either
a standard printer or to a label printer. When using a standard printer the
results will print in lines on one print out. When printing to a label printer,
each selected test will print out on an individual label.
Enable "Screenshot Printout" if you wish to print the graphical display of
the final result for a chosen screening test. This is the same view of the
measurement screen that you see at the conclusion of a screening. (It does
not print an ABR waveform.)
"Printer Settings" – This control opens a standard Windows printer dialog
from within the MB 11 software. For efficiency it is recommended that you
set the typical printer you will use to print your MB11 results as the default
printer in the operating system settings.
"Encode Export Data" – If this option is enabled, all tracking files will be
encrypted during export. In order to make sure that exported data can't be
read or manipulated by any unauthorized person. A password is required to
enable or disable this option. The exported text file can be decrypted by a
separate decoder tool. Usually this is done at the tracking centre, where the
exported file is send to. A description how to decrypt the tracking file and
the password to enable or disable this option is only provided to an
authorized person on demand.
The List Field Setup area allows you to add and delete names from the drop
down fields. Use the Add control to add new names to the drop down list.
Use the Delete control to remove the displayed name from the drop down
field.
"Examiner/Screener" – a default name is present based on the PC name.
Names added to the Examiner/Screener drop down list field will be accessible
in the main screen. The key combination of Ctrl+E locks and unlocks the
screener field on the main screen. When locked, then the screener field is
ghosted with the default name displayed and cannot be changed. When
8100498-4_OM_MB11_Classic_3.18_EN_16a.docx 25 01/16