Maico MB 11 Classic Operation Manual page 43

Operation Manual MB 11 Classic
At the bottom of the test screen are several function buttons:
Figure 19
MB 11 - program "Test stop"
Other Ear: After the test is completed on one ear, use this button to change
to the other ear. Then select "Start Measurement" when ready. Note that
when an MB11 Classic is attached to the PC, the Other ear button cycles
through selections for Right ear, Left ear and Binaural (i.e. Both ears) tests if
the Binaural testing setting is enabled in the Options dialog. Be sure that
you cycle through to your desired ear measurement based on the ear(s) to
which you have coupled the insert earphones.
Start Measurement: Click on the "Start Measurement" button to begin a
new test. The function button changes to "Stop Measurement".
Stop Measurement: An ongoing test can be aborted by clicking on the
button "Stop Measurement". The result (Abort) will be displayed and stored
in the database for quality- controlled tracking. If tracking is enabled, then a
pop-up window will open allowing you to choose the reason for the test
termination.
Pause: Stops the collection and processing of EEG samples although the
acoustic stimulus continues to be presented. The function button changes
to "Continue" and the status indication at the bottom of the screen shows
"Test in progress". Select the "Continue" button to resume data
processing.
Quit: Completes the screening phase and returns to the main screen.
8100498-4_OM_MB11_Classic_3.18_EN_16a.docx 41 01/16