Working With A "Today's List - Maico MB 11 Classic Operation Manual

Operation Manual MB 11 Classic

5.8 Working with a "Today's list"

Figure 11
MB 11 - Today's list
If several tests will be conducted in one day, it may be easier to enter the
data of all babies before you start to test. In this case click on the button
"New data" and enter the name, birthdate, ID and sex, as described in
chapter 5.6. If you are saving additional information for HiTrack, click on
the Tracking button and enter this additional data as well. After all the
desired data is entered click on the button "Add to Today's list".
Now click again on the button "New data" and proceed as described before.
Repeat this until you have entered the data of all babies to be tested.
Later on, when testing, you just have to click the button "Display Today's
list". The list of the babies to be tested today appears on the screen so that
you can select the desired name.
After selecting the baby to be tested, select the ear to be tested, right R or
left L (or Binaural), and start the test by clicking on the button "Measure".
For the test procedure refer to chapter 6.
Names entered into Today's List will remain until at least one test has been
initiated on the patient or until 48 hours have elapsed.
8100498-4_OM_MB11_Classic_3.18_EN_16a.docx 32 01/16