Nibe VVM 225 User Manual page 46

1.9.11
- degree of effect
Setting range: 0.1 – 1.0
Default value: 0.5
Using +Adjust, the installation communicates with the underfloor heating's
control centre* and adjusts the heating curve as well as the calculated supply
temperature according to the underfloor heating system.
Here you can activate the climate systems you want +Adjust to affect. You can
also set how much effect +Adjust is to have on calculated supply temperature.
The higher the value, the greater the effect.
*Support for +Adjust required
46 Chapter 3 | VVM 225 – at your service
NOTE
+Adjust must first be selected in menu 5.4 "soft inputs/outputs".
- degree of effect
climate system 1
+adjust 1.9.11
NIBE VVM 225