2.4 System
The
System
menu is used for administrative changes. There are 7 sub-menus that
can be accessed from here.
date [set/show]
network [disable/ set/ status]
Note:
if connected through the Ethernet management port, after issuing
▶
the disable command, the session will be lost.
set:
Allows the user to set the date and time
•
date [YYYY-MM-DD]
•
servers [server1,server2,...]
•
time [HH:MM:SS]
•
timezone [timezone]
•
type [user/ntp]
show:
Displays the date.
show_available_timezones:
used for setting a new date.
disable:
Disables the Ethernet management port.
The serial management port will still be operating.
After issuing the command, the user must confirm
it [yes / no].
set:
Allows the user to set the IP acquisition mode of the
unit to either DHCP or STATIC. In case STATIC is selected,
the user has to input the IPv4, network mask, gateway and
DNS address.
•
•
•
•
•
25
prints available timezones to be
dns
gateway
ip
mask
type [dynamic/static]