license
reboot
Note:
Rebooting the unit will temporarily disrupt the data flow.
▶
snmp [config/informsinks/state/users]
status:
Displays the network parameters of the unit:
IPmode, Link status, IP, Mask, Gateway and DNS.
install
is used for installing a new license
Reboots the system, keeping all configurations intact. After
issuing the command, the user must confirm it [yes].
config
informsinks
26
• set --enable [true/false]
• show current state informsinks
• add
• --active [true/false]
• --community
• --host
• --name
• --port
• --protocol [tcp/udp]
• change
• --id
• --active [true/false]
• --community
• --host
• --name
• --port
• --protocol [tcp/udp]
• delete --id
• show