Administration; Https Certificate; System Control - ProfiTap IOTA 1G User Manual

Hide thumbs Also See for IOTA 1G:

Table of Contents

Note: If your IOTA device is running a version older than v2.2.2, you will first need to update it to v2.2.2

or v2.2.3 before updating it to the latest version. The procedure is as follows:

1. Retrieve the v2.2.2 or v2.2.3 release file from https://iota.profitap.com/release/.

2. Update your IOTA device using this file by clicking the File Update button and selecting the file.

3. Update your IOTA device to the latest version, either by clicking the Cloud Update button, or by

repeating the above steps using the latest release from https://iota.profitap.com/release/.

3.6. Administration

Click the Generate button to generate a new self-signed HTTPS certificate and key for connection to the

IOTA management interface. Alternatively, a certificate and certificate key can be imported by clicking the

Browse buttons, selecting the appropriate files, and clicking the Import button. Note that the imported

HTTPS certificate must include the EKU and SAN fields.

IOTA can be restarted, shut down, or reset to factory settings, via these buttons. Factory reset is only

possible if no capture is currently in progress (capture can be stopped on the

page).

Capture > Capture Control

Table of Contents

Iota 1g+Iota 10g