Table of Contents
Advertisement
INGRESS
RULE: On the X2-SERIES, users can define specific traffic manipulation
rules to be performed on the interface INGRESS pipeline. Note that these operations
will be performed before the filter and action engine described above. Users should
ensure that the configured ingress rules don't impact the functionality of the other
rules.Each Rule Set can include an independent set of ingress rules associated to
each port. Note that it is possible to have only a single rule for port and that these
ports will be available only as input in other rules.
The available traffic manipulation options are:
ACTION TYPE
VLAN Tag/Strip
IPv4 Address
GRE-TAP Tunnel
Termination
ERSPAN Tunnel
Termination
VXLAN Tunnel
Termination
DESCRIPTION
This option will remove or add a VLAN tag to all traffic
incoming in the selected port.
Allow the device interface to receive routed traffic in a
IPv4 network.
When enabled, users can associate a MAC and IPv4
Address to the selected interface. This will be available
in the network and can be used to direct a GRE-TAP
(Ethernet over GRE) tunnel in the NPB interface. The
traffic will be decapsulated and processed further using
the other user rules
Terminate and decapsulate an ERSPAN tunnel directed to
the configured IPv4 address;
Terminate and decapsulate a VXLAN tunnel direccted to
the configured IPv4 address and UDP port;
17
Advertisement
Table of Contents
