Note:
This menu is the only one available when logged out.
▶
1.2 Port Management
The
Port Management
detailed status information and allowing an easy configuration for each interface
(port), as well as a more detailed view of the attached SFP modules. Besides the
visual overview, the port information is also provided in a list view.
Configuration of a port is done by left-clicking on its graphical representation, thus
exposing the following menu:
◉
Port:
shows the port number
◉
Status:
displays additional information on the selected port: the current
state of the port, the Tx and Rx bandwidth statistics and the SFP module
information (if present)
◉
Enable/Disable:
◉
Speed:
Allows the user to change the port speed between 100G and 40G, or
to split the port (2 x 50G, 4 x 25G, 4 x 10G) in order to use split cables.
If the user wishes to change the configuration of a group of ports at the same
time, this is possible using the <Manage Multiple> button. Thus the port panel
will allow the user to select more ports and change their state by choosing a new
configuration from the <Set Multiple Ports> button.
page is a graphical representation of the system, providing
Allows the user to enable or disable a specific interface.
10