Configuring The Ethernet Management Port - ProfiTap X2-3200G Product Manual

Packet broker

Hide thumbs Also See for X2-3200G:

Table of Contents

4.1 Configuring the Ethernet Management Port

After logging in with the newly created admin account, the Ethernet management

port can be configured by running the following command:

.> system.network.set

Depending on user's requirements, the IP can be set either dynamic (DHCP) or

static (custom IP). Please follow the instructions to configure the preferred option.

After the configuration is complete, the system is accessible through the network via

SSH and

X2-Manager

X2-3200G

can also be directly connected to a computer through its Ethernet

management port. In this case, manual IP policy must be applied to both the unit

and the computer.

Note:

If the computer network interface is only 10/100 Mbps, a special

▶

twisted pair cable must be used instead of a normal patch cable.

For security reasons, an SSL certificate is pre-installed.

(web-based interface) at https://assigned_IP.

Table of Contents