Table of Contents
Advertisement
1.6 Administration
The
Administration
related settings.
The
Setup
tab allows editing the administration contact details (name, phone, email),
the system date and time and the network address. This view can also be used to
regenerate or replace the GUI HTTPS certificate.
▶ Note:
In case the IP is set from static to DHCP, the new IP must first
be discovered or allocated by the gateway (using a mac allocation
table). Also, disabling the network interface will make the web interface
unavailable, in which case a serial connection to the unit must be
established in order to reactivate the network interface (see chapter 4,
chapter 4.1 for additional details).
The
Firmware
tab allows installing a new firmware on the board. The latest firmware
version is available publicly at https://x2series.profitap.com/img/.
If the device is able to access this location, it will also be possible to automatically
download the latest available firmware and update the device. The License
information section displays the information related to the board license.
SNMP
The
view can be used to control the device's SNMPv3 service. This
functionality allows the operators to monitor the state of the device and the
interface's traffic counters. The information can be accessed after having defined
SNMP user credentials. It is also possible to configure the device to emit traps to the
requested sink servers. The SNMP MIB files are also available from the GUI.
section allows users with administrator rights to change system-
20
Advertisement
Table of Contents
