Table of Contents
Advertisement
PROCEDURES
PUSHER CHANGEOVER
1. Open the main access cover.
3. Pull the carrier away from the home position.
INFORMATION
The following conditions must be met to complete this procedure:
•
Bar feeder switch on
Loading table in lower position
•
•
Pusher at the mechanical home position
Bar feed in STOP mode
•
2. Measure the distance of the End-of-Bar
4. Loosen up the setscrews to release the
bushing.
pusher.
SERVICE MANUAL – QL Servo S3-T
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the QUICK LOAD SERVO S3 T BARFEED and is the answer not in the manual?