Conventional Terms And Symbols; Copyright; Liability - LNS QUICK LOAD SERVO S3 T BARFEED Service Manual

Warnings of a danger, which, if not avoided, may lead to:
damage to the environment

CONVENTIONAL TERMS AND SYMBOLS

The instructions for use of the following conventional terms and symbols:
General risks
Risks of electrocution
Crushing hazard
Harmful to the environment
Material damage
Information, notes
→
Return
1), 2) Instructions for individual actions consisting of several steps
The diagrams of the plates illustrated in this manual make no distinction between the different models.
Therefore, they apply to all models covered by this service manual.
The service manual uses the following designations to define the position of an element in space (positioning).
The terms "left", "right", "front" and "rear" refer to the direction of use of the machine.

COPYRIGHT

Any reproduction, recording or distribution of all or part of this manual, in any form or by any means, mechanical, photographic,
audio or other, is strictly prohibited without the express written permission of LNS.
LNS accepts no liability for any errors in this manual and any resulting complications.
The product names indicated in this manual are registered trademarks.

LIABILITY

LNS and its subsidiaries accept no liability for any debts, losses, expenses or damages incurred or suffered by the purchaser
of this product or a third party as a result of an accident, misuse or improper use, or effects arising from unauthorized
modification, repair or alteration by LNS.
LNS and its subsidiaries will not be liable for damages and problems arising from the use of options and products other than
those provided or approved by LNS.
SERVICE MANUAL – QL Servo S3-T
GENERAL