Page 1
Pulse Data Logger PRODUCT TABLE OF CONTENTS USER GUIDE 2 Product Overview 2 Installation Guide To view the full MadgeTech product line, visit our website at madgetech.com. 2 Wiring the Data Logger 2 Device Operation 3 Device Maintenance 4 Need Help?
Page 2
PRODUCT USER GUIDE Product Overview Device Operation The Pulse101A records the number of pulse inputs or Connecting and Starting the Data Logger contact closures on the input of the device. The input is 1. Once the software is installed and running, plug the continuously sampled at 10 kHz, therefore, the input pulse interface cable into the data logger.
Page 3
3. On the General Tab, click Set Password. Recalibration 4. Enter and confirm the password in the box that The Pulse101A has a digital input signal and cannot be appears, then select OK. calibrated. A certificate of conformance can be provided.
Page 4
NEED HELP? Product Support & Troubleshooting: • Visit our Resources online at madgetech.com/resources. • Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com. MadgeTech 4 Software Support: • Refer to the built-in help section of the MadgeTech 4 Software.