To download data, connect the data logger to the windows PC with the IFC200, select the device in the list, click the Stop icon, and then click the Download icon. A graph will automatically display the data. Please refer to the pHTemp2000 Product Manual for full product details by going to madgetech.com/product-documentation.
Product Overview The pHTemp2000 is a pH and temperature data logger with LCD display. The convenient LCD provides access to the current pH and temperature readings, as well as minimum, maximum and average statistics. Display Overview Power Jack Indicators...
4-wire probe, but will still yield measurements better than required for a pH-measure- ment with the 2 or 3-wire probes. Insure that the probe you select can be connected to the pHTemp2000 RTD input by selecting a probe with lead wires, or by attaching an adapter that will allow you to con- nect wire leads to the probe.
Connecting and Starting the data logger Once the software is installed and running, plug the interface cable into the data logger. Connect the USB end of the interface cable into an open USB port on the computer. The device will appear in the Connected Devices list, highlight the desired data logger.
Front Panel Overview Changing the display units The pHTemp2000 comes with factory default display units of °C for the RTD temperature channel, and pH for the pH channel. These units can be easily changed by pressing the F3 button in the main screen and then selecting either F1 for the RTD temperature or F2 for pH probe.
Product User Guide Screen Descriptions Main Screen: Displays last measured values Status Screens: Run Parameters Memory Status Date and Time Statistics Statistics Menu Screen: Displays options available within the statistics menu pH Channel Statistics: Displays pH statistics Type Statistics: Displays statistics from pH statistics Temperature Channel Statistics: Displays temperature statistics Statistics Information Screen: Displays current statistics information...
Page 9
Device Configuration Menu Displays options available within the device configuration menu F1 = DISPLAY: enters Adjust Visibility screen F2 = POWER: enters Power Modes screen F3 = INFO: goes to Device Information screens F4 = EXIT: returns to main screen...
Prices and specifications subject to change. See MadgeTech’s terms and conditions at madgetech.com To send devices to MadgeTech for calibration, service or repair, please use the MadgeTech RMA Process by visiting madgetech.com, then under the services tab, select RMA Process.
0 to 95 %RH (non-condensing) Material Black Anodized Aluminum Dimensions 4.8 in x 3.3 in x 1.25 in (122 mm x 84 mm x 32 mm) Weight 16 oz (440 g) Approvals Specifications subject to change. See MadgeTech’s terms and conditions at madgetech.com...