Transmit real-time data to the MadgeTech Cloud Services platform via the MadgeTech Data Logger Software running on a central PC or transmit directly to the MadgeTech Cloud without a PC using the MadgeTech RFC1000 Cloud Relay (sold separately).
To claim a data logger, select the desired data logger in the list and click the Claim icon. Once the data logger has been claimed, select a start method in the Device tab. For steps to claim the data logger and view data using MadgeTech Cloud Services, refer to the MadgeTech Cloud Services Software Manual at: www.madgetech.com/mt-cloud-manual.pdf...
‘0’ (‘0’ indicates non-wireless mode, ‘1’ indicates wireless mode). The RFOT has a set of DIP Switches located on the back of the PCB, on the opposite side of the battery (diagram 1a). Change the DIP Switches to match the desired channel (diagram 1b).
WARNING: Avoid stretching the O-Ring over the threads. Sharp threads can cut the new O-Ring. O-Ring Maintenance O-Ring maintenance is a key factor when properly caring for the RFOT. The O-Rings ensure a tight seal and prevent liquid from entering the inside of the device. Please refer to the application note “O-Rings 101: Protecting Your Data”, found on the MadgeTech website,...
Product User Guide RMA Instructions To send a device back in to MadgeTech for calibration, service or repair, follow the instructions below to create an RMA (Return Merchandise Authorization) on the MadgeTech website: Go to www.madgetech.com/rma. Sign into your account. For new customers, select Create an Account.
RFOT Compliance Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 10
Product User Guide Temperature Probe Temperature Range -50 °C to +200 °C (-58 °F to +392 °F) Resolution 0.01 °C (0.018 °F) ±0.1 °C at 0 °C to 100 °C (±0.18 °F at 32 °F to 212 °F) Calibrated Accuracy ±0.5 °C (±0.9 °F) outside of that range Resistance Nominal Range...
±1 minute/month (at 25 °C) Computer Interface USB (interface cable required) PC Compatibility MadgeTech 4: Windows 10, 8, 7, Vista, Window XP with SP3 MadgeTech Cloud Services Compatible Operating Environment -20 °C to +100 °C (-4 °F to +212 °F), 0 %RH to 100 %RH non-condensing Body: 8.7 in x 1.75 in dia.
Page 12
Refer to the Troubleshooting section of this document. » Visit our Knowledge Base online at www.madgetech.com/kbase. » Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com. MadgeTech 4 Software Support: » Refer to the built-in help section of the MadgeTech 4 Software.