High temperature data logger with 24 inch bendable stainless steel probe (4 pages)
Summary of Contents for MadgeTech HiTemp140-FP
Page 1
Product User Guide HiTemp140-FP and HiTemp140-FP-TSK HiTemp140-FP High Temperature Data Logger with Flexible RTD Probe HiTemp140-FP-TSK High Temperature Data Logger with Flexible RTD Probe and Thermal Shield To view the full MadgeTech product line, visit our website at www.madgetech.com.
Device Operation ........... 3 Product Maintenance ........4 RMA Instructions ........... 4 HiTemp140-FP General Specifications ....5 HiTemp140-FP-TSK General Specifications ..6 Disclaimer & Terms of Use .. Back Cover To view the full MadgeTech product line, visit our website at www.madgetech.com.
HiTemp140-FP & HiTemp140-FP-TSK Product Overview The HiTemp140-FP is a durable, user friendly high temperature data logger featuring a long, flexible RTD probe with a narrow diameter, making it ideal for use in steam sterilization and lyophilization processes. Commonly used for mapping, validation and monitoring of high temperature surfaces, this stainless steel data logger is available in two models, the HiTemp140-FP-36 and the HiTemp140-FP-72, which feature either 36 inch or 72 inch flexible probe lengths, respectively.
Installing the Interface cable - IFC400 or IFC406 Refer to the “Quick Start Guide” included in the package. Installing the software The software can be downloaded from the website at www.madgetech.com/software-down- load. Device Operation Connecting and Starting the data logger - Once the software is installed and running, plug the interface cable into the docking station.
To send the devices back, visit www.madgetech.com, select Services then RMA Process. RMA Instructions To send a device back in to MadgeTech, follow the instructions below to create an RMA (Return Merchandise Authorization) on the MadgeTech website: 1. Visit www.madgetech.com, under the Services tab select RMA Process.
Dimensions (body) 2.95 in x 0.97 in x 0.97 in (75 mm x 24.6 mm x 24.6 mm) • HiTemp140-FP-36: 36 in x 0.10 in (914 mm x 2.5 mm) Dimensions (probe) • HiTemp140-FP-72: 72 in x 0.10 in (1829 mm x 2.5 mm)
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE, FORCE OVER DISCHARGE, CRUSH, PENETRATE, OR INCINERATE. BATTERY MAY LEAK OR EXPLODE IF HEATED ABOVE 150 ºC (302 ºF). Specifications subject to change. See MadgeTech’s terms and conditions at www.madgetech.com...
(air, steam, oil, water, etc.) If MadgeTech is unable to definitively calculate the suitability of our product for your application, we can provide a test unit outfitted with a high temperature indicator sticker.