MadgeTech Pulse101A Product Information Card

Pulse data logger

Advertisement

Quick Links

Description

Maximum Pulse Rate
Input Range
Input Low
Input High
Internal Weak Pull-Up
Input Impedance:
Minimum Pulse Width/
Contact Closure Duration:
Reading Rate
Memory
250,000 readings in repeatable start/stop mode
Wrap Around
LED Indicator
Required Interface Package
Baud Rate
Typical Battery Life
Operating Environment
Material
Dimensions
Weight
Approvals
Battery Warning
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE,
FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY
LEAK OR EXPLODE IF HEATED ABOVE 80 °C (176 °F).
Specifications subject to change.
See MadgeTech's terms and conditions at www.madgetech.com
MadgeTech, Inc.
6 Warner Road
Phone 603.456.2011
www.madgetech.com
Pulse101A
10KHz
0 to 30VDC continuous
<0.4 V
>2.8 V
<60 μA
>60kΩ
≥10 microseconds
1 reading every second up to 1 reading
every 24 hours
500,000 readings
Yes
Red & Green
IFC200
115,200
10 years at a 15 minute reading rate
-40 °C to +80 °C (-40 °F to +176 °F),
0 %RH to 95 %RH non-condensing
ABS plastic
1.4 in x 2.5 in x 0.6 in
(36 mm x 64 mm x 16 mm)
0.9 oz (24 g)
CE
Warner, NH 03278
l
Fax 603.456.2012
l
info@madgetech.com
l
DOC-1212035-00 REV 6 2014.07.30
Product Information Card
Pulse101A
Pulse Data Logger
Pulse101A
Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289
To view the full MadgeTech product line,
visit our website at
www.madgetech.com.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pulse101A and is the answer not in the manual?

Questions and answers

Summary of Contents for MadgeTech Pulse101A

  • Page 1 LEAK OR EXPLODE IF HEATED ABOVE 80 °C (176 °F). Red 485 Specifications subject to change. Dark Blue Pantone 289 Light Blue 58% of Pantone 289 See MadgeTech’s terms and conditions at www.madgetech.com MadgeTech, Inc. 6 Warner Road Warner, NH 03278 Phone 603.456.2011 Fax 603.456.2012...
  • Page 2 The Pulse101A records the number of pulse inputs or contact closures on the input of the application and click “Start”. (“Quick Start” applies the most recent custom start options, device.

Table of Contents