Motion Detection - D-Link JustConnect DNR-4020-16P User Manual

Section 3 - Configuration
Configure an alarm to trigger when the camera detects motion.
Channel
Select the channel to configure.
Enable
Toggle this to cause motion detection to trigger an alarm.
Motion
Toggle this to enable or disable motion analysis.
Analysis
Event Actions
Select the event(s) the alarm should trigger from the following
list:
• Email: Send an email notification
• Buzzer: Trigger a buzzer sound
• Popup Message: Display a notification in a popup window
• Full Screen: Display a full-screen notification on the attached
monitor
Enable Alarm
Trigger a notification on the Alarm Out interface(s).
Out / Camera
Alarm Out
Enable Event
Toggle to keep a record of alarm events.
Recording
Detection
Select the area of the display to scan for motion.
Area
Detection
Enable or disable the alarm according to a particular schedule.
Schedule
D-Link DNR-4020-16P User Manual

Motion Detection

115