D-Link JustConnect DNR-4020-16P User Manual page 143

Section 3 - Configuration
Advance Setting
On this tab you can configure advanced settings for the NVR's user accounts.
Password
Toggle this to enable double password authentication.
double auth.
Boot Wizard
Toggle this to set the boot wizard to load automatically when
the device is booted up.
Auto Login
Toggle this to set the device to log in automatically.
Logout time
Set the number of minutes of inactivity after which the device
should log out automatically.
Monitor
channel(s)
Select the channels to continue to monitor after logging out
when logout
from the device.
D-Link DNR-4020-16P User Manual 138